We propose a general method of designing phase-analysis algorithms for Ronchi phase-shifting lateral-shearing interferometry. Based on the expression and method, three new phase-shifting algorithms are designed to eliminate negative error effects of interference from unwanted diffraction orders, which limits the accuracy of wavefront aberration measurement. The proposed eight-, 10-, and 13-frame algorithms can eliminate the effects of the first , , and multi-diffraction orders, respectively. Simulation works and experimental results verify the general expression and corresponding designed method.
Nanoscale defects on the surface of ultra-precision optical elements seriously affect the beam quality in optical systems. In response to the challenge of detecting nanoscale defects on optical component surfaces, we propose a method for the detection and classification of various types of defects on optical component surfaces via reflection Mueller matrix spectroscopy (RMMS). Firstly, an electromagnetic scattering theoretical model for various types of defects on the surface of optical elements and the incident and scattered fields were established by combining the bidirectional reflection distribution function (BRDF) and the Rayleigh–Rice vector scattering theory. Then, the optimal conditions for RMMS measurements were determined by numerically simulating the BRDF. On this basis, the surface roughness and pockmarks of the optical test plate were simulated and analyzed via RMMS, and the results were verified experimentally; then, dirty particles and pockmarks above the surface of the optical element and subsurface bubble defects (SSBD) were simulated and analyzed via RMMS. The results showed that some elements of the Mueller matrix could significantly distinguish defects on the surface of the optical element with dimensions smaller than the visible wavelength, and the dimensions of various types of defects of the element could be inverted using the values of the Mueller matrix elements. This method provides a theoretical basis and reference for the detection and classification of various types of defects in precision optical components.
An optical element defect detection imaging method based on micro-Raman spectroscopy is proposed to achieve high-precision imaging of optical element defects and their distribution. The detection precision of the system is immediately reflected in the imaging quality. The sharpness value of the mapping images is calculated using the Sum of Modulus of Gray Difference function. The selection of the Raman peak is an important step, and when a borosilicate glass sample with standard defects is measured for verification, it is found that the Raman peak light intensity changes at −37 and 28 cm−1. When these two peaks were used for 2D mapping, obvious defect contours can be obtained, while the light intensity at other sites could not be used for imaging, and remained essentially constant. Through the detection of laser burning defects, new peaks appear at the burned defect location that could be used for imaging, and the burning defect area can be clearly distinguished from the non-burning area. By changing the laser burning conditions, the Raman shift changes, which verifies that there is a certain correlation between the laser burning degree and the Raman shift, which also provides a basis for 2D mapping imaging of defect detection.
27 February 2024 in IEEE Transactions on Instrumentation and Measurement
Efficiently detecting the state of charge (SOC) of lithium-ion battery is crucial for advancing new energy technologies, and using ultrasound for SOC characterization has been demonstrated as a viable method. However, there is relatively little work on ultrasonic characterization of SOC by combining the structure of lithium-ion batteries. In this study, we propose a multi-feature indicators SOC estimation method for hard-shell lithium-ion battery using ultrasonic reflected waves. We analyze wave structure and X-ray CT result to identify echo origins. On this basis, a feature extraction method combining “echo correlation features” and “bottom wave features” are proposed, with a total of 16-dimensional acoustic features extracted. Then a “classification-regression” machine learning model composed of support vector regression and extreme gradient boosting is designed. This method can accurately estimate the SOC of the battery, and the average root mean square error of the estimation results on the test set is about 1.62%. The estimation results under different experimental conditions and different models also prove that the method we proposed has strong accuracy and robustness, which is a new idea for the application of ultrasonic detection methods in battery management systems.