Stine Skrunes

Stine Skrunes


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 June 2016 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Closed access
SSStine Skrunes
Stine Skrunes
CBCamilla Brekke
Camilla Brekke
CJCathleen E. Jones
Cathleen E. Jones
Benjamin HoltBenjamin Holt
Benjamin Holt
In this paper, we present the experimental setup and data collection during the Norwegian Radar oil Spill Experiment 2015, followed by a comparison of a subset of the multisensory synthetic aperture radar (SAR) imagery collected during the experiment. Multipolarization SAR data acquired by Radarsat-2, TerraSAR-X, and the uninhabited aerial vehicle synthetic aperture radar (UAVSAR) less than 6 min apart are investigated and compared. All three sensors detect the four slicks of varying physiochemical composition under challenging conditions posed by small slicks in high wind conditions of $\sim$12 m/s. The detectability is best in TerraSAR-X and UAVSAR. The high wind allows for large signal-to-noise ratios over the slicks, even in the satellite data and in cross-polarization channels. Although detection is possible, discrimination between slick types, using multipolarization parameters previously found useful for this purpose, is not possible under these conditions for the acquisitions in the instance studied.

19 June 2020 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Verified
Journal Article
Open access
MEMartine Espeseth
Martine Espeseth
CJCathleen Jones
Cathleen Jones
Benjamin HoltBenjamin Holt
Benjamin Holt
CBCamilla Brekke
Camilla Brekke
SSStine Skrunes
Stine Skrunes
New quantitative and semiautomated methods for analyzing oil slick evolution using a time series of $L$ -band synthetic aperture radar (SAR) images with short repeat time are developed and explored. In this study, two methods that are complementary in terms of identifying temporal changes within an oil slick are presented. The two methods reflect two ways of evaluating the oil slicks. The first method identifies regions within the slick that show persistently high damping ratio (the contrast between clean sea and oil intensity), using higher damping values as a proxy for increasing oil thickness. This method also weights the age of the scenes as the algorithm incorporates new images. The second method outputs the short-term drift pattern and the changes in the damping ratios and copolarization ratios between two scenes, proxies for thickness, and emulsification. Both methods can aid in identifying regions of high priority for oil recovery. Due to the simplicity of the methods, they can be adapted to time-series data from different types of sensors, e.g., optical and SAR imagery. The methods are demonstrated on three $L$ -band uninhabited aerial vehicle SAR UAVSAR time series acquired in November 2016 over a persistent seep in the Mississippi Canyon Block 20 of the Gulf of Mexico. The results of the two methods clearly show the movement and the weathering of the oil as a function of both time and location.

4 November 2014 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
SSStine Skrunes
Stine Skrunes
CBCamilla Brekke
Camilla Brekke
ADAnthony Doulgeris
Anthony Doulgeris
The potential of using log-cumulants for discrimination between mineral oil spills and other low-backscatter ocean features in synthetic aperture radar data is investigated here. Radarsat-2 fine quad-polarization data containing experimental oil spills, as well as simulated biogenic slicks and a natural phenomenon, are analyzed. For this data set, the combined information of matrix log-cumulants of first and second order is found to clearly discriminate the majority of the mineral oil spills from the simulated biogenic slicks and the natural phenomenon. These preliminary findings suggest that the proposed method has a potential application in classification of low-backscatter ocean features of unknown origin.

3 December 2019 in Remote Sensing
Verified
Journal Article
Open access
PDF file
SSStine Skrunes
Stine Skrunes
MJMalin Johansson
Malin Johansson
CBCamilla Brekke
Camilla Brekke
Oil spill detection services based on satellite synthetic aperture radar (SAR) frequently detect oil slicks close to platforms due to legal releases of produced water. Separating these slicks from larger releases, e.g., due to accidental leakage is challenging. The aim of this work is to investigate the SAR characteristics of produced water, including the typical appearance in HH/VV data, possible variations with oil volume, and limitations on detectability. The study is based on dual-polarization TerraSAR-X data collected with constant imaging geometry over one platform in the North Sea. Despite the low oil content (volume percentage of 0.001%–0.002% in this data set), produced water is clearly detectable, with median damping ratios around 3–9 dB. Produced water is detected here in wind speeds of 2–12 m/s, with reduced detectability above ca 9 m/s. Hourly average release volumes with an oil component as low as 0.003 m 3 are detected. The damping ratio, polarization difference, and co-polarization power ratio are investigated and show no clear correlation with released oil volume. However, some indications of trends such as increasing signal damping with oil volume should be further investigated when data over larger release volumes are available. When comparing the properties of the entire slick with the most recently released part, similar or slightly higher damping ratios were found in the full slick case.

25 March 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
DIDmitry Ivonin
Dmitry Ivonin
CBCamilla Brekke
Camilla Brekke
SSStine Skrunes
Stine Skrunes
Andrei IvanovAndrei Ivanov
Andrei Ivanov
NKNataliya Kozhelupova
Nataliya Kozhelupova
This study is devoted to a generalization of C-band Radarsat-2 and X-band TerraSAR-X synthetic aperture radar (SAR) data in the form of a diagram serving to easily identify mineral oil slicks (crude oil and emulsions) and separate them from the other oil slicks. The diagram is based on the multi-polarization parameter called Resonant to Non-resonant signal Damping (RND) introduced by Ivonin et al. in 2016, which is related to the ratio between damping within the slick of the short waves and wave breakings. SAR images acquired in the North Sea during oil-on-water exercises in 2011–2012 containing three types of oil spills (crude oil, emulsion, and plant oil) were used. The analysis was performed under moderate sea conditions (wind speeds of 2–6 m/s and sea wave heights of less than 2 m), the incidence angles of 27°–49°, and the signal-to-noise ratio (SNR) of −3 to 11 dB within slicks. On the diagram plane, created by the RND parameter and the Bragg wave number, the mineral oil samples form a well-outlined zone, called a mineral oil zone. For C-band data, the plant oil samples were clearly distinguished from the mineral oils in the diagram. Determination of the confidence level for the detection of mineral oils versus plant oil was proposed using the mineral oil zone boundaries. The mineral oil data with SNR within slicks better than 2 dB lay within this zone with a confidence level better than 65%. The plant oil data with the same SNR lay outside this zone with a confidence level of better than 80%. For mineral oil with SNR of −3 dB, the confidence level is 55%.