Mehmet Ali Altuncu

Mr. Mehmet Ali Altuncu

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2015 in International Journal of Information and Electronics Engineering
Verified
Journal Article
Closed access
MAMehmet Ali Altuncu
Mehmet Ali Altuncu
TGTaner Guven
Taner Guven
YBYasar Becerikli
Yasar Becerikli
SSSuhap Sahin
Suhap Sahin

14 May 2026 in Polymers for Advanced Technologies
Verified
Journal Article
Open access
PDF file
MAMehmet Ali Altuncu
Mehmet Ali Altuncu
Osman UlkirOsman Ulkir
Osman Ulkir
MKMelih Kuncan
Melih Kuncan
This study investigates the effects of fused deposition modeling (FDM) parameters on the tensile strength and electrical conductivity of conductive polylactic acid (PLA)‐based composites. An integrated experimental and machine learning (ML)‐based framework was used. Printing speed (PS), infill density (ID), layer thickness (LT), and nozzle temperature (NT) were determined as printing parameters. A full factorial design was employed, yielding 81 unique parameter combinations. Experimental results showed that both tensile strength and electrical conductivity were affected by the selected printing parameters. Tensile strength ranged from 16.44 to 49.14 MPa, and electrical conductivity ranged from 0.01332 to 0.10442 S/cm. Overall, lower speed, higher density, lower thickness, and higher temperature improved performance. Analysis of variance (ANOVA) revealed that ID and LT were the most influential factors, with statistically significant effects ( p < 0.05) for both response variables. ML models were developed to establish predictive relationships between printing parameters and output responses. For this purpose, a random forest (RF), k‐nearest neighbors (KNN), and deep kernel learning (DKL) inspired model were trained and evaluated using five‐fold cross‐validation. For tensile strength estimation, the RF and KNN models achieved R 2 values of 0.8582 and 0.8899, respectively, while the DKL‐inspired model provided the highest accuracy with R 2 = 0.9999. Similarly, for electrical conductivity estimation, the RF and KNN models produced R 2 values of 0.9001 and 0.8810, respectively, while the DKL‐inspired model again showed the best performance with R 2 = 0.9999. Sample‐based error analysis further confirmed the superiority of the DKL‐inspired model. For this model, the mean percentage error was 0.14% for tensile strength and 0.28% for electrical conductivity. The results demonstrate that the combined use of experimental design, statistical analysis, and ML provides an effective approach to understanding the multifunctional performance of FDM printed conductive PLA‐based composites.

25 December 2020 in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Verified
Journal Article
Closed access
PDF file
ZPZeynep Pinar
Zeynep Pinar
FGFidan KAYA GÜLAĞIZ
Fidan KAYA GÜLAĞIZ
MAMehmet Ali Altuncu
Mehmet Ali Altuncu
SŞSuhap Şahi̇n
Suhap Şahi̇n
Tekstil sektöründe, mamul kumaş üzerindeki üretim hatalarının tespiti, kalite kontrol aşamasında yapılan en önemli ve maliyetli işlerdendir. Kumaşlar konfeksiyon aşamasına gelmeden kontrol edilir ve hatalı kısımlar kumaşın içinden parça halinde kesilerek alınır. Bu durum fireye yani üretimde düşüşe yol açmaktadır. Eğer kontrol esnasında fark edilememiş veya parça alımı ile fireye ayırılamamış kusurlar varsa bu kumaşlarda ikinci kaliteye düşmektedir. Kalite kontrol sonrası top kesim işleminde ayrılan hatalı parça kumaşlar veya fark edilmeyerek müşteriye gönderilmiş ikinci kalite ürünler ciddi maliyetlere sebep olmaktadır. İnsan gözüyle yapılan kalite kontrol işlemi, iş gücü ve zaman olarak oldukça maliyetli olmasına rağmen başarımı istenildiği kadar yüksek değildir. Bu nedenle kalite kontrol aşamasında otomatik ve akıllı sistemlerin kullanımı için çalışmalar yapılmaktadır. Bu çalışmada, %100 pamuk ipliğinden üretilerek ve indigo boyarmaddesi ile boyanmış olan denim kumaşlardaki hataların tespiti ve sınıflandırılması için görüntü işleme yöntemleri önerilmektedir. Yapılan çalışmada görüntü işleme algoritmaları kullanılarak hata tespiti yapılan kumaş görüntülerinden, özellik çıkarımı ile sayısal veri elde edilmiştir. Oluşturulan özellik matrisi dört farklı algoritmada incelenmiş, hatalı ve hatasız görüntünün ayrımı sağlanmıştır. Yapılan karşılaştırmalarda en iyi performans gösteren algoritmanın J48 Karar Algoritması olduğu görülmüştür.

1 May 2018
Verified
Conference Paper
Closed access
MAMehmet Ali Altuncu
Mehmet Ali Altuncu
MKMehmet Muzaffer Kösten
Mehmet Muzaffer Kösten
MÇMetaet Ali Çavuşlu
Metaet Ali Çavuşlu
SŞSuhap Şahın
Suhap Şahın
With technology, rapidly developing image sensors have begun to be used in many areas, from smart phones to unmanned vehicles. In particular, systems that have to process many images at the same time, such as unmanned vehicles, require a high amount of processing power and use expensive equipment. In this work, we describe FPGA based implementation of basic image processing applications that can work on low cost FPGA families for use in applications with high processing power. With the IP core, users can easily perform mirroring, inversion, negation, thresholding, brightness and contrast enhancement / reduction on the image. The IP core platform is designed to be independently. Synthesis results are given with reference to Xilinx's Spartan 7 FPGA. The results show that the developed IP core has a low hardware cost.

1 May 2013
Verified
Conference Paper
Closed access
BSBurcu KIR SAVAŞ
Burcu KIR SAVAŞ
MAMehmet Ali Altuncu
Mehmet Ali Altuncu
ŞSŞuhap Sahi̇n
Şuhap Sahi̇n
In modern computer systems (communication systems, military systems, medical applications, etc.) are sophisticated mathematical operations and trigonometric calculations widely used. CORDIC (Coordinate Rotation DIgital Computer) architecture should be used on digital computers to implement complex mathematical operations and trigonometric calculations. In this study, two architectures called FP-CORDIC and IQCORDIC have been devised to implement CORDIC algorithm. These architectures have been realised with IEEE-754 and IQ-Math in order. Also they have been compared according to execution time, process accuracy and hardware performance criteria on FPGA.

3 March 2025 in Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
Verified
Journal Article
Open access
PDF file
AKAsuman Kaplan
Asuman Kaplan
EKEsra Kavadar
Esra Kavadar
MAMehmet Ali Altuncu
Mehmet Ali Altuncu
Meme kanseri, dünya genelinde kadınlar arasında en sık görülen kanser türüdür ve erken teşhis, tedavi başarısını önemli ölçüde artırmaktadır. Bu çalışmada, meme ultrason görüntülerinden iyi huylu ve kötü huylu tümörleri sınıflandırmak amacıyla radyomik özellikler ve makine öğrenmesi teknikleri kullanılmıştır. Çalışmada, halka açık BUSI veri seti kullanılmıştır. Sadece iyi huylu ve kötü huylu olarak etiketlenmiş görüntüler sınıflandırmada kullanılmış olup, normal etiketli görüntüler çalışmaya dahil edilmemiştir. Bu yaklaşım, modelin iki sınıf arasındaki ayrımı en yüksek doğrulukla yapmasına odaklanmıştır. Veri setindeki dengesizlik, kötü huylu tümörlerin görüntülerinin y ekseninde aynalanarak artırılmasıyla giderilmiştir. PyRadiomics kütüphanesi ile çıkarılan 123 radyomik özellik arasından, özellik önem skoru ve korelasyon matrisi kullanılarak en önemli 40 özellik seçilmiştir. Sınıflandırma aşamasında XGBoost, Gradient Boosting, AdaBoost, SVM, Random Forest ve Decision Tree algoritmaları uygulanmış, en yüksek doğruluk oranı (%98.13) Gradient Boosting algoritması ile elde edilmiştir.