The properties of lignin-based polymeric materials depend on blend composition and casting conditions. When solution-cast at 150° and annealed at 180 °C, blends containing 85% w/w levels of methylated ball-milled softwood lignin can surpass polystyrene in tensile behaviour. It is more challenging to achieve similar results with comparable blends of ligninsulphonates, whether methylated or not. Nevertheless, 85% w/w ligninsulphonate-based materials containing miscible low-Tg polymers can match the tensile properties of polyethylene. The ligninsulphonate components themselves are assembled into 9–15 nm macromolecular entities, the integrities of which are maintained through strong noncovalent interactions between inner co-facially disposed aromatic rings. In contrast, the peripheral aromatic rings typically exhibit a greater incidence of less stable edge-on arrangements. An intriguing aspect of the materials that are composed solely of (unmethylated or methylated) ligninsulphonates is their insolubility in water. This observation is consistent with the absence of a discernible glass-transition temperature in the differential scanning calorimetric thermograms of ligninsulphonate-based materials when they prominently display domains maintained by strong interactions between co-facial aromatic rings. The demonstrated integrity of polymeric materials composed (almost) exclusively of simple lignin derivatives has far-reaching implications for the configurations of lignin macromolecules in general. Contrary to an enduring hypothesis proposed 55 years ago, polymer chains in lignin preparations are not covalently crosslinked, even though their conformations are clearly affected by powerful noncovalent forces between the aromatic substructures.
Lignins upgrade the lignocellulosic cell-wall domains in all vascular plants; they embody 20–30% of terrestrial organic carbon. For 50 years, mistaken assumptions about the configuration of lignin have hindered the development of useful polymeric materials with a lignin content above 40 wt%. Now, polymeric materials composed only of methylated softwood lignin derivatives can exhibit better tensile behavior than polystyrene. Marked improvements may be achieved with small quantities (5–10 wt%) of miscible blend components as simple as poly(ethylene glycol). These observations contradict commonly held views about crosslinking or hyper-branching in lignin chains. The hydrodynamic compactness of the macromolecular lignin species arises from powerful noncovalent interactions between the lignin substructures. Individual lignin components undergo association to form macromolecular complexes that are preserved in plastics with a very high lignin content. Material continuity results from interpenetration between the peripheral components in adjoining lignin complexes. Through interactions with the peripheral domains, miscible blend components modulate the strength and ductility of these utterly original lignin-based plastics.
21 September 2016 in ACS Sustainable Chemistry & Engineering
Functional polymeric materials composed solely of lignin preparations appeared only very recently. A gradual paradigm shift spanning 56 years has revealed how lignin–lignin blends can upgrade the performance of 100 wt% lignin-based plastics. The view, first espoused in 1960, that lignin macromolecules are crosslinked reduces the plausibility of creating functional polymeric materials that are composed only of lignin preparations. Lignin-based materials would be much weaker mechanically if interstices remain in significant numbers between adjoining macromolecular structures that consist of rigid crosslinked chains. In 1982, random-coil features in the hydrodynamic character of kraft lignin (KL) components were evident from ultracentrifugal sedimentation equilibrium studies of their SEC behavior. In 1997, it was recognized that the macromolecular species in plastics with 85 wt% levels of KL are associated complexes rather than individual components. Finally, in 2016, the first polymeric material composed entirely of ball-milled softwood lignin (BML) was found to support a tensile strength above polyethylene. Except in its molecular weight, the BML was similar in structure to the native biopolymer. It was composed of associated lignin complexes, each with aromatic rings arranged in two domains. The inner domain maintains structural integrity largely through noncovalent interactions between cofacially-offset aromatic rings; the peripheral domain contains a higher proportion of edge-on aromatic-ring arrangements. Interdigitation between peripheral domains in adjoining complexes creates material continuity during casting. By interacting at low concentrations with the peripheral domains, non-lignin blend components can improve the tensile strengths of BML-based plastics to values well beyond those seen in polystyrene. The KL-based plastics are weaker because the peripheral domains of adjoining complexes are less capable of interdigitation than those of BML. Blending with 5 wt% 1,8-dinitroanthraquinone results in a tensile strength above that of polyethylene. Analogous effects can be achieved with 10 wt% maple γ-valerolactone (GVL) lignin which, with a structure close to the native biopolymer, imparts some native character to the peripheral domains of the KL complexes. Comparable enhancements in the behavior of BML complexes upon blending with 10 wt% ball-milled corn-stover lignin (BMCSL) result in lignin-only polymeric materials with tensile strengths well beyond polystyrene.