Air pollutants such as volatile organic compounds (VOCs), nitrogen oxides (NOx), and sulfur dioxide (SO₂), as well as water pollutants (e.g., heavy metals phosphorous, fluoride, boron, phenolic compounds, and dyes), are harmful to humans and the environment. Effective control and reduction of their pollution is therefore an important topic for today’s scientists. Fly ash (FA) is a type of industrial waste that can cause multiple environmental problems if discharged into the air. On the other hand, because of its high porosity, large specific surface area, and other unique characteristics, FA can also be used as a low-cost and high efficient adsorbent for treatment of environment pollutants. This paper reviews the effects of FA on treatment of the air and water pollution, including to the current status of global FA utilization, physicochemical properties, principle of adsorption, and the application direction of FA in the future. Since most researchers only studied the adsorption capacity of pure FA or zeolite (synthesized from FA), the research on the fabrication of nanofiber membranes using FA is still lacking, especially the adsorption of VOCs from air and heavy metals from wastewater using FA nanofiber membranes. Therefore, in this paper, we focus on reviewing and summarizing that FA can be spun into a fiber membrane via electrospinning with the ability to adsorb VOCs and heavy metals from air and wastewater. Moreover, we also evaluate the future application value of FA nanofiber membranes in the field of environmental pollution control. Utilization of nanofiber technology to fabricate multi-functional FA emerging composite materials to mitigate air and water pollution has great potential in the future, especially the use of pollutant materials to control other pollutants.

Since the advent of biodiesel as a renewable alternative fuel, it has attracted wide attention from researchers. The raw materials of biodiesel generally produced by transesterification of animal fats, plants, algae or even waste cooking oil, which makes full use of natural resources and alleviates increasingly problematic oil shortages and environmental pollution. Biodiesel can be directly applied to vehicle engines without any modification and will both improve the combustion quality of the engine and reduce the harmful emissions from the engine. This study mainly summarizes the influence of biodiesel applications on diesel engines, including the impact on engine performance, combustion characteristics, emission characteristics, vibration, noise characteristics, and compatibility. In particular, unregulated emissions such as volatile organic compounds (VOCs) and polycyclic aromatic hydrocarbons (PAHs), which are rarely mentioned in other review articles, are also discussed in this study.

Due to the rapid development of the global economy, fossil oil is widely used, leading to its depletion and gradual deterioration of the global environment, including global warming, the greenhouse effect, fog, and haze. Therefore, many researchers have been interested in studying alternative fuels in an attempt to develop an eco-friendly fuel to replace traditional fuel and solve the above environmental problems. Biodiesel is a renewable and eco-friendly fuel that is the most promising alternative fuel for diesel engines, and a significant amount of research and development has focused on biodiesel. Canola oil biodiesel (COB) is one type of biodiesel, and it has an advantage in oil production per unit area compared with other biodiesels. This paper summarizes and reviews studies related to the use of COB in different diesel engines under a variety of operating conditions. We focus on evaluating the combustion and emission characteristics of COB based on a large number of papers (including our previous studies). In addition, this paper serves as a valuable reference for in-depth studies of COB use in diesel engines, as it covers the topic from the production of COB to its use in diesel engines.

As an environmentally friendly water-soluble polymer, polyvinyl alcohol (PVA) has attracted extensive attention because of its non-toxic, degradable, low cost, and good biocompatibility. Electrospinning is a kind of nanotechnology, and the nanofiber membrane prepared by it has the advantages of large surface area-to-volume ratios, nano- to micron-sized fibers, etc. Herein, a simple and facile one-step green electrospinning method was developed to fabricate various environmentally friendly PVA nanofiber membranes. The lipophilic properties of PVA membranes were investigated and optimized according different PVA concentrations. The PVA electrospun fiber prepared from the solution at a concentration of 10 wt% had the highest adsorption capacity for the adsorption of new and waste engine oils, and the waste engine oil adsorption capacity (12.70 g/g) was higher than that of new engine oil (11.67 g/g). It also has a relatively large BET surface area (12.05 m²/g), a pore volume (0.04 cm³/g), and an appropriate pore diameter (13.69 nm) and fiber diameter (174.21 nm). All electrospun PVA membranes showed excellent lipophilic properties due to their oil contact angles of much less than 30°. Therefore, PVA electrospun fibrous membranes have great application potential in the field of purifying engine oil due to the excellent lipophilic properties and oil absorption capacity.

In this study, detailed experiments were conducted on the combustion and exhaust characteristics of ethanol–diesel blended fuels. The four-stroke four-cylinder common-rail direct injection diesel engine was used. The experiment was carried out at 750 rpm at a low speed idle, and a 40 Nm engine load was applied to simulate the operation of the accessories during the low idle operation of the actual vehicles. The test fuels were four types of ethanol-blended fuel. The ethanol blending ratios were 0% (DE_0) for pure diesel, and 3% (DE_3), 5% (DE_5) and 10% (DE_10) for 3%, 5% and 10% ethanol mixtures (by vol.%). Blending ethanol with diesel fuel increased the maximum combustion pressure by up to 4.1% compared with that of pure diesel fuel, and the maximum heat release rate increased by 13.5%. The brake specific fuel consumption (BSFC) increased, up to 5.9%, as the ethanol blending ratio increased, while the brake thermal efficiency (BTE) for diesel-ethanol blended fuels remained low, and was maintained at 23.8%. The coefficient of variation (COV) of the indicated mean effective pressure (IMEP) was consistently lower than 1% when ethanol was blended. The blending of ethanol increased the ignition delay from a 12.0 degree crank angle (°CA) at DE_0 to 13.7 °CA at DE_10, and the combustion duration was reduced from 21.5 °CA at DE_0 to 20.8 °CA at DE_10. When ethanol blending was applied, nitrogen oxides (NOx) reduced to 93.5% of the level of pure diesel fuel, the soot opacity decreased from 5.3% to 3% at DE_0, and carbon monoxide increased (CO) by 27.4% at DE_10 compared with DE_0. The presence of hydrocarbon (HC) decreased to 50% of the level of pure diesel fuel, but increased with a further increase in the ethanol blending ratio. The mean size of the soot particulates was reduced by 26.7%, from 33.9 nm for pure diesel fuel, DE_0, to 24.8 nm for DE_10.