Recently, tuning the normal ferroelectric performance of poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-co-TrFE)) to either relaxor ferroelectric or anti-ferroelectric behavior by confining the relaxation of ferroelectric crystal domains physically or chemically has attracted considerable interest to achieve high discharged electric energy density (Ue) and low energy loss (Ul) for energy storage applications in high pulse capacitors. To improve the dielectric and energy storage properties as well as reduce the energy loss induced by the ferroelectric relaxation of P(VDF-co-TrFE), unsaturation containing P(VDF-co-TrFE) films were uniaxially stretched after crosslinking with peroxide in this work. P(VDF-co-TrFE) containing unsaturation was synthesized via controlled hydrogenation and dehydrochlorination of commercially available poly(vinylidene fluoride-co-chlorotrifluoroethylene) (P(VDF-co-CTFE)). The properties of the films obtained were characterized with differential scanning calorimetry (DSC), X-ray diffraction (XRD), dielectric constant and electric displacement–electric field (D–E) hysteresis loop measurements. Compared with the as-cast and as-crosslinked films, the stretched films exhibit a significantly enhanced dielectric constant, breakdown field (Eb > 500 MV m−1) and Ue but depressed energy loss. This could be attributed to the enhanced film quality, optimized crystalline properties, improved orientation uniformity of crystal domains as well as accelerated ferroelectric relaxation induced by the crosslinking and mechanical stretching. The best performance was achieved for the stretched film with a dielectric constant of 15 at 1 kHz, a relatively high Ue of 17.5 J cm−3 and a low energy loss of about 30% at 575 MV m−1.
29 November 2012 in Journal of Materials Chemistry C
For potential application in high energy storage capacitors with high energy density and low energy loss, three sets of poly(vinylidene fluoride-co-trifluoroethylene-co-chlorotrifluoroethylene) [P(VDF-TrFE-CTFE)] grafted with poly(methacrylic ester)s, including poly(methyl methacrylate) (PMMA), poly(ethyl methacrylate) (PEMA) and poly(butyl methacrylate) (PBMA) copolymers, are designed and investigated carefully. Due to their intermediate polarity, relatively high glass transition temperature, and excellent compatibility with PVDF chains, the poly(methacrylic ester) segments introduced could not only dramatically weaken the coupling interactions of oriented polar crystals, but could also accelerate the reversal switching of polar crystal domains along the applied electric field, which leads to well hindered remnant polarization. As a result, the displacement–electric field (D–E) hysteresis behaviors of the graft copolymers could be tuned from typical ferroelectric to either antiferroelectric or linear shape under high electric field. Meanwhile, significantly reduced energy loss and effectively improved energy discharging efficiency were obtained. Compared with PMMA and PBMA, PEMA with intermediate polarity and grafting length exhibits more suitable confinement of the F–P transition of P(VDF-TrFE-CTFE), and thus more desirable energy storage properties are observed in the resultant copolymers. These findings may help to deeply understand the ferroelectric nature of PVDF based fluoropolymers and design new energy storage capacitor materials with high discharged energy density and low energy loss.