Samantha Grist

Ms. Samantha Grist


Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 June 2012 in Optics Express
Verified
Journal Article
Closed access
PDF file
XWXu Wang
Xu Wang
WSWei Shi
Wei Shi
HYHan Yun
Han Yun
SGSamantha Grist
Samantha Grist
NJNicolas A. F. Jaeger
Nicolas A. F. Jaeger
LCLukas Chrostowski
Lukas Chrostowski
We demonstrate the design, fabrication and measurement of integrated Bragg gratings in a compact single-mode silicon-on-insulator ridge waveguide. The gratings are realized by corrugating the sidewalls of the waveguide, either on the ridge or on the slab. The coupling coefficient is varied by changing the corrugation width which allows precise control of the bandwidth and has a high fabrication tolerance. The grating devices are fabricated using a CMOS-compatible process with 193 nm deep ultraviolet lithography. Spectral measurements show bandwidths as narrow as 0.4 nm, which are promising for on-chip applications that require narrow bandwidths such as WDM channel filters. We also present the die-to-die nonuniformity for the grating devices on the wafer, and our analysis shows that the Bragg wavelength deviation is mainly caused by the wafer thickness variation.

17 February 2015 in Optics Express
Verified
Journal Article
Open access
PDF file
VDValentina Donzella
Valentina Donzella
ASAhmed Sherwali
Ahmed Sherwali
JFJonas Flueckiger
Jonas Flueckiger
SGSamantha Grist
Samantha Grist
SFSahba Talebi Fard
Sahba Talebi Fard
LCLukas Chrostowski
Lukas Chrostowski
Standard silicon photonic strip waveguides offer a high intrinsic refractive index contrast; this permits strong light confinement, leading to compact bends, which in turn facilitates the fabrication of devices with small footprints. Sub-wavelength grating (SWG) based waveguides can allow the fabrication of low loss devices with specific, engineered optical properties. The combination of SWG waveguides with optical micro-resonators can offer the possibility of achieving resonators with properties different from the traditional SOI rings. One important property that SWG rings can offer is decreased light confinement in the waveguide core; this improves the resonator’s sensitivity to changes in the cladding refractive index, making the rings ideal for refractive index sensing applications. In this paper, we present the design and experimental characterization of SWG based rings realized on SOI chips without upper cladding (permitting their use as sensors). The fabricated rings offer quality factors in the range of ~1k-6k, depending on SWG parameters. Based on the comparison of experimental and simulated data we expect sensitivities exceeding 383 nm/RIU in water and 270 nm/RIU in air, showing excellent potential for use in sensing applications.

15 October 2010 in Sensors
Verified
Journal Article
Open access
PDF file
SGSamantha Grist
Samantha Grist
LCLukas Chrostowski
Lukas Chrostowski
KCKaren Cheung
Karen Cheung
The presence and concentration of oxygen in biological systems has a large impact on the behavior and viability of many types of cells, including the differentiation of stem cells or the growth of tumor cells. As a result, the integration of oxygen sensors within cell culture environments presents a powerful tool for quantifying the effects of oxygen concentrations on cell behavior, cell viability, and drug effectiveness. Because microfluidic cell culture environments are a promising alternative to traditional cell culture platforms, there is recent interest in integrating oxygen-sensing mechanisms with microfluidics for cell culture applications. Optical, luminescence-based oxygen sensors, in particular, show great promise in their ability to be integrated with microfluidics and cell culture systems. These sensors can be highly sensitive and do not consume oxygen or generate toxic byproducts in their sensing process. This paper presents a review of previously proposed optical oxygen sensor types, materials and formats most applicable to microfluidic cell culture, and analyzes their suitability for this and other in vitro applications.

26 March 2013 in Optics Express
Verified
Journal Article
Closed access
PDF file
SGSamantha Grist
Samantha Grist
SSShon A. Schmidt
Shon A. Schmidt
JFJonas Flueckiger
Jonas Flueckiger
VDValentina Donzella
Valentina Donzella
WSWei Shi
Wei Shi
LCLukas Chrostowski
Lukas Chrostowski
Silicon photonic biosensors are highly attractive for multiplexed Lab-on-Chip systems. Here, we characterize the sensing performance of 3 µm TE-mode and 10 µm dual TE/TM-mode silicon photonic micro-disk resonators and demonstrate their ability to detect the specific capture of biomolecules. Our experimental results show sensitivities of 26 nm/RIU and 142 nm/RIU, and quality factors of 3.3x104 and 1.6x104 for the TE and TM modes, respectively. Additionally, we show that the large disks contain both TE and TM modes with differing sensing characteristics. Finally, by serializing multiple disks on a single waveguide bus in a CMOS compatible process, we demonstrate a biosensor capable of multiplexed interrogation of biological samples.

2 June 2014 in Optics Express
Verified
Journal Article
Closed access
PDF file
SFSahba Talebi Fard
Sahba Talebi Fard
VDValentina Donzella
Valentina Donzella
SSShon A. Schmidt
Shon A. Schmidt
JFJonas Flueckiger
Jonas Flueckiger
SGSamantha Grist
Samantha Grist
LCLukas Chrostowski
Lukas Chrostowski
This work presents simulation and experimental results of ultra-thin optical ring resonators, having larger Evanescent Field (EF) penetration depths, and therefore larger sensitivities, as compared to conventional Silicon-on-Insulator (SOI)-based resonator sensors. Having higher sensitivities to the changes in the refractive indices of the cladding media is desirable for sensing applications, as the interactions of interest take place in this region. Using ultra-thin waveguides (<100 nm thick) shows promise to enhance sensitivity for both bulk and surface sensing, due to increased penetration of the EF into the cladding. In this work, the designs and characterization of ultra-thin resonator sensors, within the constraints of a multi-project wafer service that offers three waveguide thicknesses (90 nm, 150 nm, and 220 nm), are presented. These services typically allow efficient integration of biosensors with on-chip detectors, moving towards the implementation of lab-on-chip (LoC) systems. Also, higher temperature stability of ultra-thin resonator sensors were characterized and, in the presence of intentional environmental (temperature) fluctuations, were compared to standard transverse electric SOI-based resonator sensors.

2 August 2013 in Optics Express
Verified
Journal Article
Closed access
PDF file
XWXu Wang
Xu Wang
SGSamantha Grist
Samantha Grist
JFJonas Flueckiger
Jonas Flueckiger
NJNicolas A. F. Jaeger
Nicolas A. F. Jaeger
LCLukas Chrostowski
Lukas Chrostowski
We present the design, fabrication, and characterization of integrated Bragg gratings in silicon-on-insulator slot waveguides. The Bragg gratings are formed with sidewall corrugations, either on the inside or on the outside of the waveguide. We demonstrate resonators implemented using phase-shifted Bragg gratings in slot waveguides, showing quality factors up to 3 × 104. Due to the strong optical confinement in the slot, these devices are promising for optical sensing applications. The devices were fabricated using a CMOS-compatible process, facilitating high-volume and low-cost production.