Auxetic structures exhibit unusual changes in size, expanding laterally upon stretching instead of contracting. This paper presents this effect in a failsafe mode in structures made of rigid squares. We applied the concept of auxetic structures made of rigid rotating squares (from Grima and Evans) and offer a novel solution for connecting them. By introducing axes of rotation on the surface of the squares, a reliable working system is obtained, free from stress, in which the squares can come into contact with each other and completely cover the surface of the structure, or, in the open position, form regularly arranged pores. Herein, we present a new 2D auxetic metamaterial that is mathematically generated based on a theoretical relationship of the angle between the edges of a square and the position of the axis of rotation. Physical models were generated in the form of a planar structure and in the form of a circular closed structure. Such physical models confirmed our initial considerations and the geometrical relationships, offering new application possibilities. The novel structure that was designed and manufactured for the purpose of the paper can be considered as a new proposal in the market of auxetic materials.

Auxetic tubular structures are widely known structures, characterized by a negative Poisson’s ratio upon stretching and deformation in the axial and transverse directions, which have numerous application possibilities. In this paper, tubular structures were realized by rolling up planar auxetic structures and using rigid square frames as unit cells. Planar and tubular structures were built from square frames that were 3D printed with plastic or laser-cut from metal. The changes in linear dimensions of the studied structures were based on a hinge mechanism, the functioning of which was experimentally verified on different solutions leading to square unit cells. To connect the square frames of the structure, an innovative solution was used in the form of rotation axes on their surface at a preset distance from the edge of the square frame. The geometric parameter thus introduced was used to determine the relative change in the size of the structure when stretched (i.e., when moving from the closed to the open position).

The subject of the work is analysis, which presents a renowned auxetic structure based on so-called rotating polygons, which has been subject to modification. This modification entails introducing pivot points on unit cell surfaces near rectangle corners. This innovative system reveals previously unexplored correlations between Poisson’s ratio, the ratio of rectangle side lengths, pivot point placement, and structural opening. Formulas have been derived using geometric relationships to compute the structure’s linear dimensions and Poisson’s ratio. The obtained findings suggest that Poisson’s ratio is intricately tied to the structure’s opening degree, varying as the structure undergoes stretching. Notably, there are critical parameter limits beyond which Poisson’s ratio turns positive, leading to the loss of auxetic properties. For elongated rectangles, extremely high negative Poisson’s ratio values are obtained, but only for small opening angles, while with further stretching, the structure loses its auxetic properties. This observed trend is consistent across a broad category of structures comprised of rotating rectangles.

This article presents a study of metamaterial structures that exhibit auxetic properties. This unusual phenomenon of simultaneous orthogonal expansion of the metamaterial in tension, and vice versa in compression, with vertical and horizontal contraction, is explored for structures made of re-entrant unit cells. The geometry of such structures is analysed in detail, and the relationships are determined by the value of the Poisson’s ratio. It is shown that the Poisson’s ratio depends not only on the geometry of the unit cell but also on the degree of strain. Depending on the dimensions of the structure’s horizontal and inclined struts, the limit values are determined for the angle between them. By creating physical structures made of re-entrant cells, it is demonstrated that the mechanism of change in the structure’s dimensions is not due to the hinging but to the bending of the struts. The experimental section contains the results of compression tests of a symmetrical structure and tensile tests of a flat mesh structure. In the case of the mesh structure, a modification of the re-entrant cells was used to create arched strut joints. This modification makes it possible to obtain greater elongation of the mesh structure and larger NPR values.