In this paper we propose a color-gradient lattice Boltzmann (LB) model for simulating two-phase flows with high density ratio and high Reynolds number. The model applies a multirelaxation-time (MRT) collision operator to enhance the stability of the simulation. A source term, which is derived by the Chapman-Enskog analysis, is added into the MRT LB equation so that the Navier-Stokes equations can be exactly recovered. Also, a form of the equilibrium density distribution function is used to simplify the source term. To validate the proposed model, steady flows of a static droplet and the layered channel flow are first simulated with density ratios up to 1000. Small values of spurious velocities and interfacial tension errors are found in the static droplet test, and improved profiles of velocity are obtained by the present model in simulating channel flows. Then, two cases of unsteady flows, Rayleigh-Taylor instability and droplet splashing on a thin film, are simulated. In the former case, the density ratio of 3 and Reynolds numbers of 256 and 2048 are considered. The interface shapes and spike and bubble positions are in good agreement with the results of previous studies. In the latter case, the droplet spreading radius is found to obey the power law proposed in previous studies for the density ratio of 100 and Reynolds number up to 500.
Lattice Boltzmann method (LBM) is an effective tool for simulating the contact-line motion due to the nature of its microscopic dynamics. In contact-line motion, contact-angle hysteresis is an inherent phenomenon, but it is neglected in most existing color-gradient based LBMs. In this paper, a color-gradient based multiphase LBM is developed to simulate the contact-line motion, particularly with the hysteresis of contact angle involved. In this model, the perturbation operator based on the continuum surface force concept is introduced to model the interfacial tension, and the recoloring operator proposed by Latva-Kokko and Rothman is used to produce phase segregation and resolve the lattice pinning problem. At the solid surface, the color-conserving wetting boundary condition [Hollis et al., IMA J. Appl. Math. 76, 726 (2011)] is applied to improve the accuracy of simulations and suppress spurious currents at the contact line. In particular, we present a numerical algorithm to allow for the effect of the contact-angle hysteresis, in which an iterative procedure is used to determine the dynamic contact angle. Numerical simulations are conducted to verify the developed model, including the droplet partial wetting process and droplet dynamical behavior in a simple shear flow. The obtained results are compared with theoretical solutions and experimental data, indicating that the model is able to predict the equilibrium droplet shape as well as the dynamic process of partial wetting and thus permits accurate prediction of contact-line motion with the consideration of contact-angle hysteresis.
10 October 2015 in Structural and Multidisciplinary Optimization
Thermocapillary migration describes the phenomenon whereby liquid droplets move from warm to cold regions on a nonuniformly heated hydrophilic surface. Surface modifications can be applied to manipulate this migration process. In the present study, a three-dimensional color-gradient lattice Boltzmann model is used to investigate the droplet migration behavior on a series of wettability-confined tracks subject to a uniform temperature gradient. The model is validated by simulating the thermocapillary-driven flow with two superimposed planar fluids in a heated microchannel and the capillary penetration of a wetting fluid in a capillary tube. An in-depth study of the wettability-confined tracks confirms the capacity to manipulate the droplet migration process, that is, the wettability-confined tracks can accelerate thermocapillary migration compared with a smooth surface. The effects of changes in the viscosity ratio and interfacial tension are investigated, and it is found that a lower viscosity ratio and larger interfacial tension cause the droplet to migrate faster. Moreover, a systematic study of the track vertex angle is conducted, and the mechanism through which this parameter influences the droplet migration is analyzed. Then the effect of the track wettability on droplet migration is explored and analyzed. Finally, a serial wettability-confined track is designed to realize long-distance droplet migration, and the narrow side width of the connection region is found to play a key role in determining whether the droplets can migrate over long distances. The results provide some guidance for designing tracks that enable precise droplet migration control.
25 June 2014 in Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy
The present study is to explore potential benefits of axial flow compressor blade optimization through a flexible tuning. Modifications of blade sectional profiles and their stacking line can control spanwise blade loading distribution, reduce shock losses, and extend operating flow range. Most previous studies focused on tuning either sectional profiles or stacking line, but little work was conducted by collaboratively varying both, which may be due to abrupt rise of optimization variables and complexity. An efficient optimization method is developed to handle highly nonlinear high-dimension blade optimization problem with simultaneous variation of both sectional profiles and stacking line. It incorporates an improved cooperative co-evolution algorithm optimizer and one-stage expected improvement based adaptive surrogate model. The former decomposes the high-dimension problem into low-dimension subproblems and they can be readily solved; the latter enables the optimizer to jump out of the local minima and conduct the aim-oriented optimal search toward global optimum. A coarse surrogate model is firstly constructed with some DOE samples but it is refined during optimization process with newly identified and evaluated samples. The model prediction accuracy is gradually improved, thus it captures the distinct features (especially global optimum) of optimization problem. Both blade sectional profiles and their spatial positions are simultaneously varied. Four sectional profiles of hub, 33% span, 67% span, and shroud are parameterized, and each is defined by a mean camber line and thickness distribution. Both of them are represented, respectively, by a third-order B-Spline curve. Spatial position of each profile varies in term of sweep and lean. Blade design optimization is conducted for Rotor67 at design flow on a single workstation of Dell 7500. Performance gains are significant: at design flow, overall efficiency and pressure ratio are increased, respectively, by 1.44 and 7.24%; off-design performances are also improved over the entire flow range.