Siphons have been widely used in water supply systems and sewage networks. However, it is difficult to implement non-destructive testing due to structural complexity and limited accessibility. In this paper, a novel condition classification method for water-filled underground siphons is proposed, which uses the acoustic signals received from acoustic sensors installed in the siphon. The proposed method has the advantages of simpler operation, lower cost, and higher detection efficiency. The acoustic wave forms in the siphons reflect on the system characteristics. Seven typical conditions of a water-filled underground siphon were investigated, and a series of experiments were conducted. Acoustic signals were recorded and transformed into acoustic pressure responses for further analysis. The variational mode decomposition (VMD) and the acoustic energy flow density were used for signal processing and feature extraction. The acoustic energy flux density eigenvectors were input to three different classifiers to classify the siphon conditions. The results demonstrate that the proposed acoustic-based approach can effectively classify the blockage and damage conditions of siphons, and the recognition accuracy of the proposed method is higher than 94.4%. Therefore, this research has value for engineering applications.

Targeting the challenge of determining the degree of blockage in buried pipelines and the difficulty of effectively extracting blockage features, a blockage detection method integrating variational mode decomposition (VMD) and information gain is proposed. Acoustic impulse response signals were obtained by deconvolving the output signals of the system, which were then subjected to VMD to obtain 12 components in different frequency ranges. Next, information gain (IG) was introduced to characterize the 12 components quantitatively, through which the components containing rich information about the pipe conditions were selected out. Meanwhile, sound pressure level conversion was performed on the selected components to amplify any changes in the sound field. Finally, the root mean square entropy (RMSE) was calculated to constitute the feature eigenvectors, which were input into Random Forests (RF) classifier for defect identification of pipeline. As the experimental results demonstrate, the proposed method is capable of determining the degree of blockage effectively in the running state. Meanwhile, it can also eliminate the interference of functional parts such as lateral connections during the identification process, thereby improving the identification accuracy. The present study has shown both theoretical significance and application value in the field of defect detection and recognition.