Fixed video camera systems are consistently prone to importune motions over time due to either thermal effects or mechanical factors. Even subtle displacements are mostly overlooked or ignored, although they can lead to large geo-rectification errors. This paper describes a simple and efficient method to stabilize an either continuous or sub-sampled image sequence based on feature matching and sub-pixel cross-correlation techniques. The method requires the presence and identification of different land-sub-image regions containing static recognizable features, such as corners or salient points, referred to as keypoints. A Canny edge detector ( ) is used to locate and extract the boundaries of the features. Keypoints are matched against themselves after computing their two-dimensional displacement with respect to a reference frame. Pairs of keypoints are subsequently used as control points to fit a geometric transformation in order to align the whole frame with the reference image. The stabilization method is applied to five years of daily images collected from a three-camera permanent video system located at Anglet Beach in southwestern France. Azimuth, tilt, and roll deviations are computed for each camera. The three cameras showed motions on a wide range of time scales, with a prominent annual signal in azimuth and tilt deviation. Camera movement amplitude reached up to 10 pixels in azimuth, 30 pixels in tilt, and 0.4° in roll, together with a quasi-steady counter-clockwise trend over the five-year time series. Moreover, camera viewing angle deviations were found to induce large rectification errors of up to 400 m at a distance of 2.5 km from the camera. The mean shoreline apparent position was also affected by an approximately 10–20 m bias during the 2013/2014 outstanding winter period. The stabilization semi-automatic method successfully corrects camera geometry for fixed video monitoring systems and is able to process at least 90% of the frames without user assistance. The use of the greatly improves the performance of the cross-correlation algorithm by making it more robust against contrast and brightness variations between frames. The method appears as a promising tool for other coastal imaging applications such as removal of undesired high-frequency movements of cameras equipped in unmanned aerial vehicles (UAVs).
Although geologically constrained sandy beaches are ubiquitous along wave-exposed coasts, there is still a limited understanding of their morphological response, particularly under storm conditions, which is mainly due to a critical lack of nearshore bathymetry observations. This paper examines the potential to derive bathymetries from video imagery under challenging wave conditions in order to investigate headland control on morphological beach response. For this purpose, a video-based linear depth inversion algorithm is applied to three consecutive weeks of frames collected during daylight hours from a single fixed camera located at La Petite Chambre d’Amour beach (Anglet, SW France). Video-derived bathymetries are compared against in situ topo-bathymetric surveys carried out at the beginning and end of the field experiment in order to assess the performance of the bathymetric estimates. The results show that the rates of accretion/erosion within the surf zone are strongly influenced by the headland, whereas the beach morphological response can be classified into three main regimes depending on the angle of wave incidence : (1) under deflection configuration (), the alongshore sediment transport was trapped at the updrift side of the headland, promoting sand accretion. (2) Under shadowed configuration (), the interruption of the longshore current drove a deficit of sand supply at the downdrift side of the headland, leading to an overall erosion in the surf zone. (3) Under shore-normal configuration (), rip channels developed, and up-state beach transition was observed. A comparison between video-derived bathymetries and surveys shows an overall root mean square error (RMSE) around 0.49 to 0.57 m with a bias ranging between −0.36 and −0.29 m. The results show that video-derived bathymetries can provide new insight into the morphological change driven by storm events. The combination of such inferred bathymetry with video-derived surface current data is discussed, showing great potential to address the coupled morphodynamics system under time-varying wave conditions.
This paper examines the potential of an optical flow video-based technique to estimate wave-filtered surface currents in the nearshore where wave-breaking induced foam is present. This approach uses the drifting foam, left after the passage of breaking waves, as a quasi-passive tracer and tracks it to estimate the surface water flow. The optical signature associated with sea-swell waves is first removed from the image sequence to avoid capturing propagating waves instead of the desired foam motion. Waves are removed by applying a temporal Fourier low-pass filter to each pixel of the image. The low-pass filtered images are then fed into an optical flow algorithm to estimate the foam displacement and to produce mean velocity fields (i.e., wave-filtered surface currents). We use one week of consecutive 1-Hz sampled frames collected during daylight hours from a single fixed camera located at La Petite Chambre d’Amour beach (Anglet, SW France) under high-energy conditions with significant wave height ranging from 0.8 to 3.3 m. Optical flow-computed velocities are compared against time-averaged in situ measurements retrieved from one current profiler installed on a submerged reef. The computed circulation patterns are also compared against surf-zone drifter trajectories under different field conditions. Optical flow time-averaged velocities show a good agreement with current profiler measurements: coefficient of determination 0.5–0.8; root mean square error = 0.12–0.24 m/s; mean error (bias) to m/s; regression slope ; = 0.4–0.6. Despite an underestimation of offshore-directed velocities under persistent wave breaking across the reef, the optical flow was able to correctly reproduce the mean flow patterns depicted by drifter trajectories. Such patterns include rip-cell circulation, dominant onshore-directed surface flow and energetic longshore current. Our study suggests that open-source optical flow algorithms are a promising technique for coastal imaging applications, particularly under high-energy wave conditions when in situ instrument deployment can be challenging.
1 October 2018 in Estuarine, Coastal and Shelf Science
Télédétection par système vidéo de la dynamique des courants induits par les vagues et de l’evolution morpholoqique des plages soumises aux houles énergétiques: Comprendre les circulations induites par les vagues et les évolutions morphologiques du littoral est important scientifiquement et répond à une forte demande sociétale. Toutefois l’acquisition de ces données sur le terrain est coûteuse et reste un véritable défi logistique. Le développement de la télédétection optique combiné à la démocratisation de plateformes vidéo et d’algorithmes ouverts d’analyse d’image permet maintenant d’obtenir à faible cout une grande quantité d’informations sur le littoral. Ce travail s’appuie sur techniques existantes en imagerie vidéo, et sur des nouveaux développements, afin d’inférer la bathymétrie de l’avant-côte et les courants dans la zone de déferlement. Les méthodes sont validées avec une campagne de mesures intensive sur la plage d’Anglet dans le sud-ouest de la France. Pour la première fois, l’évolution spatiale et temporelle à la fois des courants et de la morphologie de la plage sont étudiés en présence de vagues de tempête.