The rapid development of new optical imaging techniques is dependent on the availability of low-cost and easily reproducible standards for technique validation. This work describes a low-cost fabrication process of an agar gel-based phantom that may accurately simulate the optical properties of different human tissues at 532 and 630nm wavelengths. It was designed to match the optical properties of the brain, bladder wall, and lung tissues. These low-cost phantoms use agar powders dissolved in water as the bulk matrix. The latter is loaded with varying amounts of India ink, and aluminium oxide Al2O3 particles for optical absorption and scattering targets. The optical properties (absorption and scattering coefficients), the primary design factor and critical parameters of these phantoms were deduced from measurements of the total attenuation coefficients ( μ t ) . It is anticipated that the constructed tissue phantoms have the potential to be used as a reference standard since it's possible to preserve the optical properties in a period exceeding two years, under ideal storage conditions.
Photovoltaic technology using perovskite solar cells has emerged as a potential solution in the photovoltaic makings for cost-effective manufacturing solutions deposition/coating solar cells. The hybrid perovskite-based materials possess a unique blend from low bulk snare concentrations, ambipolar, broad optical absorption properties, extended charge carrier diffusion, and charge transport/collection properties, making them favourable for solar cell applications. However, perovskite solar cells devices suffer from the effects of natural instability, leading to their rapid degradation while bared to water, oxygen, as well as ultraviolet rays, are irradiated and in case of high temperatures. It is essential to shield the perovskite film from damage, extend lifetime, and make it suitable for device fabrications. This paper focuses on various device strategies and computational attempts to address perovskite-based solar cells' environmental stability issues.
The electric quadrupole moments of carbon dioxide and carbonyl sulphide have been measured via the technique of electric-field-gradient-induced birefringence (the Buckingham effect). Measurements for carbon dioxide span the temperature range 299.4 to 471.7 K, which allows for separation of the temperature-independent hyperpolarizability term from the temperature-dependent quadrupole term, yielding a quadrupole moment of Θ = (−14.31 ± 0.74) × 10−40 C m2, and a hyperpolarizability term of b = (−0.34 ± 0.19) × 10−60 C3 m4 J−2. Thermal decomposition of carbonyl sulphide at elevated temperatures restricted our measurements for this molecule to room temperature (302.1 K), yielding a quadrupole moment of Θ = (−0.984 ± 0.034) × 10−40 C m2, the hyperpolarizability term having been assumed to contribute negligibly.
21 November 2020 in Environmental Monitoring and Assessment
Measurements of the temperature dependence of the Buckingham effect (electric-field-gradient-induced birefringence, EFGIB) for gaseous nitrous oxide are presented. Measurements span the temperature range 298.5–473.9 K, which allows for separation of the temperature-independent hyperpolarizability term from the temperature-dependent quadrupole term, yielding a quadrupole moment of Θ = (−11.03 ± 0.41) × 10−40 C m2, and a hyperpolarizability term of b = (−0.638 ± 0.063) × 10−60 C3 m4 J−2. For dipolar molecules, the quadrupole moment is origin dependent, and the value reported here is referred to an origin called the effective quadrupole center (EQC). Comparison of this value with the center of mass (CM) quadrupole moment obtained from MBER experiments yields information about the dynamic dipole-quadrupole and dipole-magnetic dipole polarizabilities. The temperature-independent term, previously assumed to contribute negligibly to the EFGIB, is found to contribute some (5.2 ± 0.6)% to the effect at room temperature and clearly needs to be accounted for if the quadrupole moment is to be definitively established.