A LabVIEW®-based software for the control of the fully automated multi-sequential flow injection analysis Lab-on-Valve (MSFIA-LOV) platform AutoRAD performing radiochemical analysis is described. The analytical platform interfaces an Arduino®-based device triggering multiple detectors providing a flexible and fit for purpose choice of detection systems. The different analytical devices are interfaced to the PC running LabVIEW®VI software using USB and RS232 interfaces, both for sending commands and receiving confirmation or error responses. The AUTORAD platform has been successfully applied for the chemical separation and determination of Sr, an important fission product pertinent to nuclear waste.
To reduce uncertainties in determining the source term and evolving condition of spent nuclear fuel is fundamental to the safety assessment. ß-emitting nuclides pose a challenging task for reliable, quantitative determination because both radiometric and mass spectrometric methodologies require prior chemical purification for the removal of interfering activity and isobars, respectively. A method for the determination of 90Sr at trace levels in nuclear spent fuel leachate samples without sophisticated and time-consuming procedures has been established. The analytical approach uses a commercially available automated pre-concentration device (SeaFAST) coupled to an ICP-DRC-MS. The method shows good performances with regard to reproducibility, precision, and LOD reducing the total time of analysis for each sample to 12.5 min. The comparison between the developed method and the classical radiochemical method shows a good agreement when taking into account the associated uncertainties.
30 March 2020 in EPJ Nuclear Sciences & Technologies
Nuclear metrology is an essential aspect to consider for further improvements of the initial characterization of sites under decommissioning. The H2020 Euratom project INSIDER in June 2017 aims at improving the management of contaminated materials arising from decommissioning and dismantling (D&D) operations by proposing an integrated methodology for radiological characterization. This methodology is based on advanced statistical processing and modelling, coupled with adapted or innovative measurement methods. A metrological approach supports the qualification of this integrated methodology with a concrete application to real projects representative of the use cases identified in the project. Assessment of the outcomes will be used for providing recommendations and guidance resulting in pre-standardization texts.
A quick, automated and portable system for the separation and determination of radiostrontium in aqueous samples, using Sr-resin and multi sequential flow injection analysis, has been developed. The concentrations of radioactive strontium were determined by flow scintillation counting, allowing for on-line and also on-site determination. The proposed system can determine radioactive strontium at industrial relevant levels without further modification using overall analysis time of less than 10 min per aqueous sample. The limit of the detection is 320 fg·g-1 (1.7 Bq/g).
The Euratom HARPERS (HARmonised PracticEs, Regulations and Standards in waste management and decommissioning) project aims to establish and clarify the benefits and added value of a more aligned practices, methodologies and approaches for prioritised topics related to decommissioning and initial phases of radioactive waste handling, including shared processing facilities between Member States (MS). The HARPERS project has a two-phase approach: the first phase involves engaging with Stakeholders to assess needs and pros/cons for harmonisation and to identify priority areas for deeper analysis. The second phase will pursue deeper engagement with Stakeholders to further assess the highest ranked priority areas in the three technical Work Packages. In Phase 2 the industry and business impacts resulting from the project findings will be also evaluated. Work Package 4 (WP4) of HARPERS project is focused on addressing the most important conditions and opportunities for promoting Circular Economy approaches when managing materials and waste arising from nuclear decommissioning across Europe. For the prioritisation of needs and opportunities for Circular Economy considerations, a detailed list of topics (challenges/needs - related to alignment of practices and approaches) has been developed. Topics were clustered into 7 main categories and discussed with interested external stakeholders during dedicated on-line workshops conducted in January and February 2023. Criteria for the prioritisation of topics, based on drivers relating to societal impacts, actor-specific impacts, scientific impacts and financial impacts, have been developed and discussed during the workshops too. This work presents the preliminary outcomes of the two online workshops.