The design and construction of high-efficiency carbon based non-precious metal electrocatalysts for oxygen reduction and oxygen evolution reactions (ORR and OER) with sluggish kinetics are of great importance but remain a big challenge. In this work, a 3D hybrid of bimetallic (Co/Fe) sulfide nanoparticles anchored on nitrogen-doped graphene and CNTs (Co0.2Fe0.6Sx-Gra/CNT) is fabricated via a ball-milling assisted in situ pyrolysis process. Benefitting from the synergetic effects between the carbon matrix and metallic sulfides, the optimized Co0.2Fe0.6Sx-Gra/CNT hybrid exhibits a high half-wave voltage up to 0.822 V for the ORR and a low overpotential of 540 mV at 10 mA cm−2 for the OER, outperforming Co0.2Fe0.6Sx-Gra and even a commercial Pt/C catalyst. Meanwhile, a home-made Zn–air battery with the hybrid as a cathode catalyst delivers a maximum power density up to 366 mW cm−2, along with a long-term charge and discharge stability at 10 mA cm−2. The excellent performances of the hybrid toward the ORR and OER are mainly attributed to the plentiful electron transfer channels provided by the 3D intertwined carbon matrix and enriched active sites derived from a dual-carbon coupling enhancement effect, which induce a change in the electronic structure and increase in the electron cloud density of the bimetallic sulfides and nitrogen dopant configuration. This work proves the importance of a carbon support to enhance the catalytic performance of non-precious metal-based catalysts and provides possibility of metal sulfides as bifunctional catalysts for the ORR/OER in a rechargeable Zn–air battery.
Ionic liquid (IL) combined with 2D materials has evoked considerable attention in the field of lubrication applications because of their speical structure and outstanding lubrication properties. However, the ambiguous effect of the 2D materials on the friction and anti-wear properties of the IL needs futher study. Here, we have obtained two families of IL composite films with additives of MoS and graphene via a combined process of spin-coated and curing, and the distinction of the effects of two additives on the tribological performance of the IL films was studied. The friction tests showed that the friction coefficient and anti-wear life of the IL films were greatly enhanced after the addition of MoS or graphene, which could be attributed to the improved load-carrying capacity and the second lubrication phase. Under a low addition content, graphene had more advantages to reduce the friction of the films, and MoS was more beneficial to the tribological properties with the additional content increased. The films with low friction and good anti-wear properties may be valuable for the rational design of lubrication films for the practical engineering applications.