The standards applied to reclassify landslide-conditioning factors differ among studies and may change the accuracy of identifying landslide-prone areas. Therefore, we identified two standards per factor (elevation, aspect, slope, proximity to roads and proximity to streams) from the existing literature and set them as predisposing criteria in this paper. In addition to the five factors, lithology represented by types and a landslide inventory map produced from field surveys were also used in mapping. Thirty-two landslide susceptibility maps were generated based on weights-of-evidence and evaluated using the relative operative characteristic method. The results show that the subdivision criteria of factors change the accuracy, with the success rate varying from 84.34% to 87.51%. The map with the highest value captures more landslides in relatively higher susceptibility classes and is therefore considered the optimal one. Ultimately, a simplified mode of combining subdivision criteria is proposed to simplify comparison.

Riverbed micro-topographical features, such as crest and trough, flat bed, and scour pit, indicate the evolution of fluvial geomorphology, and have an influence on the stability of underwater structures and overall scour pits. Previous studies on bedform feature extraction have focused mainly on the rhythmic bed surface morphology and have extracted crest and trough, while flat bed and scour pit have been ignored. In this study, to extend the feature description of riverbeds, geomorphic elements mapping was used by employing three geomorphic element classification methods: Wood’s criteria, a self-organization map (SOM) technique, and geomorphons. The results showed that geomorphic element mapping can be controlled by adjusting the slope tolerance and curvature tolerance of Wood’s criteria, using the map unit number and combination of the SOM technique and the flatness of geomorphons. Relatively flat bed can be presented using “plane”, “flat planar”, and “flat” elements, while scour pit can be presented using a “pit” element. A comparison of the difference between parameter settings for landforms and bedforms showed that SOM using 8 or 10 map units is applicable for land and underwater surface and is thus preferentially recommended for use. Furthermore, the use of geomorphons is recommended as the optimal method for characterizing bedform features because it provides a simple element map in the absence of area loss.

The intervalley plain is an important type of landform for mapping, and it has good connectivity for urban construction and development on the Loess Plateau. During the global landform mapping of the Deep-time Digital Earth (DDE) Big Science Program, it was found that slope and relief amplitude hardly distinguished intervalley plains from intermountain flats. This study established a novel descriptive method based on a digital elevation model to describe the difference between intervalley plains and intermountain flats. With the proposed method, first the pattern of variation in the elevation angle is described using a sight line on the terrain profile, and the lowest elevation angle (LEA) is extracted. The maximum value of the LEA is subsequently used among multiple terrain profiles to represent the maximum velocity of the elevation decrease, that is, the three-dimensional lowest elevation angle (3D LEA), to represent the intervalley plains with lower 3D LEA values. The sight parameters of the 3D LEA are evaluated to optimize the intervalley plain mapping. The functional mechanism of the sight parameters is presented from a mathematical perspective and a comparative analysis of the 3D LEA is performed for the relief amplitude and slope angle at multiple scales. This study explores sight-line analysis in a novel way, providing a new terrain factor for landform mapping involving intervalley plains.