Germanium has long been regarded as a promising laser material for silicon based opto-electronics. It is CMOS-compatible and has a favourable band structure, which can be tuned by strain or alloying with Sn to become direct, as it was found to be required for interband semiconductor lasers. Here, we report lasing in the mid-infrared region (from λ = 3.20 μm up to λ = 3.66 μm) in tensile strained Ge microbridges uniaxially loaded above 5.4% up to 5.9% upon optical pumping, with a differential quantum efficiency close to 100% with a lower bound of 50% and a maximal operating temperature of 100 K. We also demonstrate the effect of a non-equilibrium electron distribution in k-space which reveals the importance of directness for lasing. With these achievements the strained Ge approach is shown to compare well to GeSn, in particular in terms of efficiency.
The concept of direct band gap group IV materials offers a paradigm change for Si-photonics concerning the monolithic implementation of light emitters: The idea is to integrate fully compatible group IV materials with equally favorable optical properties as the chemically incompatible group III-V-based systems. The concept involves either mechanically applied strain on Ge or alloying of Ge with Sn and permits to drastically improve the insufficient radiative efficiency of Ge. The favorable optical properties result from a modified band structure transformed from an indirect to a direct one. The first demonstration of such a direct band gap laser, accomplished in GeSn, exemplifies the capability of this new concept. These systems may permit a qualitative as well as a quantitative expansion of Si-photonics into traditional but also new areas of applications, provided they can be operated energy efficiently, under ambient conditions and integrated with current Si technologies. This review aims to discuss the challenges along this path in terms of fabrication, characterization and fundamental understanding, and will elaborate on evoking opportunities of this new class of group IV-based laser materials.
Efficient and cost-effective Si-compatible lasers are a longstanding wish of the optoelectronic industry. In principle, there are two options. For many applications, lasers based on III-V compounds provide compelling solutions, even if the integration is complex and therefore costly. However, where low costs and also high integration density are crucial, group-IV-based lasers—made of Ge and GeSn, for example—could be an alternative, provided their performance can be improved. Such progress will come with better materials but also with the development of a more profound understanding of their optical properties. In this work, we demonstrate, using Ge microbridges with strain up to 6.6%, a powerful method for determining the population inversion gain and the material and optical losses of group IV lasers. This is done by deriving the values for the injection carrier densities and the cavity losses from the measurement of the change of the refractive index and the mode linewidth, respectively. We observe a laser threshold consistent with optical gain. Material loss values are obtained from a tight-binding calculation. Lasing in Ge—at steady-state—is found to be limited to low temperatures in a narrow regime of tensile strain at the crossover to the direct-band-gap band structure. We explain this observation by parasitic inter-valence-band absorption that increases rapidly with higher injection densities and temperature. -doping seems to reduce the material loss at low excitation, but it does not extend the lasing regime. We also discuss the impact of the optically inactive carriers in the L-valley on the linewidth of group IV lasers.