Hamed Gatea

Dr. Hamed Gatea

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 October 2020 in Journal of Advanced Dielectrics
Verified
Journal Article
Open access
PDF file
HGHamed Gatea
Hamed Gatea
INIqbal S. Naji
Iqbal S. Naji
The powders of lead-free material namely (nonhazardous) barium strontium titanate (BST) with different stoichiometric compositions have been synthesized by the sol–gel method. Ba[ ]Sr[ ]TiO3 (BST) materials possess the properties of both ferroelectric and dielectric materials. These materials have spontaneous polarization that can be reversed by an applied electric field and they remain polarized even when the applied external electric field is removed. Synthesized samples have been subjected to structural, morphological, and dielectric characterizations. In this study, BST nanopowders with different substitutions of [ ] (where [ ]= 0.2, 0.3, 0.4, 0.5, and 0.6) were prepared by the sol–gel method, which is an easy method with low power consumption and low temperature requirement and produces higher yield. Nanopowders had average particle sizes of 12–24 nm and particles sizes after sintering at 1000[ ]C for 3 h were 197, 267, 79.80, 63.09, and 63 nm. All resulting pellets had a polycrystalline structure. Crystal structure, space group, morphological characterization, and particle size were determined from the structural analysis using X-ray powder diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), and scanning electron microscopy (SEM). The dielectric measurements were made for BST pellets under different frequencies (1–200 kHz) from room temperature to 250[ ]C. The dielectric constants for the bulk were 743, 1566, 1091, 766, and 626 for [ ]= 0.2, 0.3, 0.4, 0.5, and 0.6, respectively. From dielectric measurements, samples with [ ]= 0.2 and 0.3 had the Curie temperatures of 70[ ]C and 28.5[ ]C, respectively, and remained intact below 0[ ]C. The sample with [ ]= 0.3 had a good dielectric measurement and moderate dissipation factor; it may be used in capacitance application as energy stores.

22 January 2022 in Energy Reports
Verified
Journal Article
Open access
AAAli Omran Al-Sulttani
Ali Omran Al-Sulttani
Mohammed AldlemyMohammed Aldlemy
Mohammed Aldlemy
MZMusaddak M. Abdul Zahra
Musaddak M. Abdul Zahra
HGHamed Gatea
Hamed Gatea
KKKhaled Khedher
Khaled Khedher
ZYZaher Mundher Yaseen
Zaher Mundher Yaseen

1 March 2021 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
HGHamed Gatea
Hamed Gatea
Tin oxide (SnO2) nanoparticles synthesized by hydrothermal method and kept at sintering temperatures (800-1200 ºC). The tin (II) chloride dehydrate (SnCl2.2H2O) used to prepared the SnO2precursor solution. The Tin oxide nanoparticles have been characterized by X-ray diffraction (XRD), Field emission scanning electronic spectroscopy (FESEM), and UV-Visible spectroscopy. The nanoparticles size of SnO2depends on the degree of sintering temperature, it found crystallite size (22.12,27.34 , 36.11 and 42.02) nm of the SnO2at800, 900, 1000 and 1200°C, respectively. XRD shows a pure tetragonal rutile crystalline structure for SnO2nanoparticles. FESEM images revealed the particles size increased with increasing sintering temperature. The transmittance and absorption are affected by an increased degree of sintering temperature. The band gap of SnO2nanoparticles decreased with increasing sintering temperature (2.6 to 2.4) eV when temperature raised from 800 to 1200 ºC, which belongs to the effect of particle size

28 October 2020 in Journal of Materials Science: Materials in Electronics
Verified
Journal Article
Closed access
PDF file
HGHamed Gatea
Hamed Gatea


1 January 2018 in Asian Journal of Chemistry
Verified
Journal Article
Closed access
HGHamed Gatea
Hamed Gatea
INIqbal S. Naji
Iqbal S. Naji