Piotr Rytlewski

Prof. Piotr Rytlewski

Institute of Materials Engineering, Kazimierz Wielki University, Chodkiewicza 30, 85-064 Bydgoszcz, Poland

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 March 2019 in Polymers
Verified
Journal Article
Open access
PDF file
Krzysztof MoraczewskiKrzysztof Moraczewski
Krzysztof Moraczewski
MSMagdalena Stepczyńska
Magdalena Stepczyńska
RMRafal Malinowski
Rafal Malinowski
TKTomasz Karasiewicz
Tomasz Karasiewicz
BJBartłomiej Jagodziński
Bartłomiej Jagodziński
Piotr RytlewskiPiotr Rytlewski
Piotr Rytlewski
In this study, natural extracts of plant origin were used as anti-aging compounds of biodegradable polymers. Coffee (0.5–10 wt%), cocoa, or cinnamon extracts were added to the polylactide matrix. The obtained materials were subjected to an accelerated aging process (720, 1440, or 2160 h) at 45 °C and 70% relative humidity under continuous UV radiation. The effectiveness of the tested extracts was compared to a commercially available anti-aging compound, 2 wt% of butylated hydroxytoluene. Visual evaluation, scanning electron microscopy, melt flow rate, thermogravimetry, differential scanning calorimetry, tensile strength, and impact tensile tests were performed. We show that the use of smaller amounts of tested extracts is particularly advantageous, which do not adversely affect the properties of polylactide-based materials at low contents. At the same time, their effectiveness in stabilizing tested properties during the accelerated aging process is mostly comparable to or greater than the reference compound.

13 June 2014 in Composite Interfaces
Verified
Journal Article
Closed access
Piotr RytlewskiPiotr Rytlewski
Piotr Rytlewski
Krzysztof MoraczewskiKrzysztof Moraczewski
Krzysztof Moraczewski
RMRafal Malinowski
Rafal Malinowski
MŻMarian Żenkiewicz
Marian Żenkiewicz
Dicumyl peroxide (DCP) is commonly applied as a cross-linking agent in polymer processing. The main aim of this work was to assess the ability of DCP to improve adhesion between polylactide (PLA) and flax or hemp fibres by their interphase cross-linking. Short fibre-reinforced PLA composites were manufactured due to the importance of short fibres in injection moulding of high-quality biocomposites. Reactive extrusion of the PLA, flax or hemp fibres, and DCP was performed. The flax or hemp fibre content was 10 wt%, while DCP varied with 0.5 and 2.5 wt%. The fibres and PLA were mechanically mixed, extruded, granulated and injection moulded to form samples for testing. The samples were characterized by differential scanning calorimetry (DSC), tensile and impact strength tests, dynamic mechanical analysis and scanning electron microscopy (SEM). It was found that flax and hemp fibres increased the Young’s modulus while these fibres decreased the impact strength. Addition of DCP led to increase in PLA crystallinity at the interface with fibres which led to further decrease in impact strength. For that reason, it was concluded that DCP is an ineffective agent to improve interphase adhesion between PLA and short flax or hemp fibres.

1 September 2018 in Polimery
Verified
Journal Article
Open access
PDF file
Piotr RytlewskiPiotr Rytlewski
Piotr Rytlewski
MSMagdalena Stepczynska
Magdalena Stepczynska
Krzysztof MoraczewskiKrzysztof Moraczewski
Krzysztof Moraczewski
RMRafal Malinowski
Rafal Malinowski
BJBartłomiej Jagodziński
Bartłomiej Jagodziński
MZMarian Zenkiewicz
Marian Zenkiewicz
The aim of this work was to produce a composite based on the blend of polylactide and polycaprolactone and reinforced with flax fiber, intended for processing by injection molding, with improved mechanical and biodegradation properties as compared to neat polylactide (PLA) and polycaprolactone (PCL). The material was prepared by mixing PLA, PCL and flax fibers (about 5 mm long), extrusion and granulation with subsequent injection molding to obtain test samples. The composites differed in the content of PCL (0, 5, 10, 15 and 30 wt %) whereas the content of flax fibers was kept constant (20 wt %). The samples were characterized by means of scanning electron microscopy (SEM), tensile and impact strength measurements, differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). Biodegradation studies were carried out using proteinase K at laboratory conditions. It was found that a reduction of fiber lengths took place during the extrusion process and that addition of flax fibers to PLA/PCL blend resulted in an increase in elastic modulus and biodegradation rate. The composite impact strength was significantly improved at 30 wt % PCL fraction.

16 April 2024 in Polymers
Verified
Journal Article
Open access
PDF file
MSMagdalena Stepczyńska
Magdalena Stepczyńska
Piotr RytlewskiPiotr Rytlewski
Piotr Rytlewski
Krzysztof MoraczewskiKrzysztof Moraczewski
Krzysztof Moraczewski
APAlona Pawłowska
Alona Pawłowska
TKTomasz Karasiewicz
Tomasz Karasiewicz
The purpose of this paper was to develop novel biocomposites with biocidal properties in microorganisms, with enhanced mechanical strength and hydrophobicity as well as with increased biodegradation rates. The main idea and the novelty of this work was to use cross-linking compounds and, at the same time, biocidal compounds—natural compounds of plant origin with biocidal properties. The authors assumed that the modification of flax fiber by natural plant compound will reduce the hydrophilicity of novel biocompositie. Biopolymer based on thermoplastic starch reinforced with flax fibres modified with tannic acid (TA) was prepared by extrusion and injection molding processes. The effects of TA modification on the mechanical and structural properties of biocomposites were analyzed through DMA, tensile tests, DSC, and TG. The biocidal and wettability properties of the biocomposites were investigated. The article also discusses the outcomes of research conducted on the structural characteristics and rates of the biodegradation of biocomposites.

22 April 2025 in Polymers
Verified
Journal Article
Open access
PDF file
Krzysztof MoraczewskiKrzysztof Moraczewski
Krzysztof Moraczewski
MSMagdalena Stepczyńska
Magdalena Stepczyńska
Aneta Raszkowska – KaczorAneta Raszkowska – Kaczor
Aneta Raszkowska – Kaczor
LSLauren Szymańska
Lauren Szymańska
Piotr RytlewskiPiotr Rytlewski
Piotr Rytlewski
Active food packaging is a significant trend in recent years in the food industry. This paper presents the results of studies on selected properties of a mixture of polylactide and polycaprolactone containing 1 or 5 wt.% of tannic acid. The function of tannic acid was to improve the miscibility of the polymers used and to give the obtained composition antibacterial properties. Studies were carried out on color and transparency, microscopic analysis, water vapor permeability, mass flow rate, static tensile properties, impact strength, dynamic mechanical analysis, thermogravimetry and differential scanning calorimetry. The obtained results did not confirm the compatibilizing effect of tannic acid, because the obtained mechanical properties were slightly worse than those of materials without the addition of this compound. However, the obtained mixture was characterized as having biocidal properties against two strains of Escherichia coli (ATCC 8739) and Staphylococcus aureus (ATCC 6538P). Antibacterial properties together with acceptable processing, mechanical and thermal properties indicate that the presented polymer material may be a potential material for the production of active food packaging.

1 March 2020 in Applied Surface Science
Verified
Journal Article
Closed access
Piotr RytlewskiPiotr Rytlewski
Piotr Rytlewski
BJBartłomiej Jagodziński
Bartłomiej Jagodziński
RMRafal Malinowski
Rafal Malinowski
BBBogusław Budner
Bogusław Budner
Krzysztof MoraczewskiKrzysztof Moraczewski
Krzysztof Moraczewski
PAPiotr Augustyn
Piotr Augustyn