Trapped vortex combustor (TVC) is an advanced low-pollution gas turbine combustor, with the adoption of staged combustion technique. To achieve low-pollutant emission and better combustion performance, the proportion of the air flow in each combustion zone should be precisely determined in the design of the combustor. Due to the presence of entrainment phenomenon, the total air flow in the cavity zone is difficult to estimate. To overcome the measurement difficulty, this study adopts the indirect measurement approach in the experimental research of entrainment phenomenon in the cavity. In accordance with the measurement principle, a TVC model fueled by methane is designed. Under two experimental conditions, i.e. with and without direct air intake in the cavity, the influence of the mainstream air flow velocity, the air intake velocity in the cavity, the height of inlet channel, the structure of holder and the structural proportion of the cavity on entrainment in the cavity is studied, respectively, through experiment at atmospheric temperature and pressure. The results suggest that the air flow velocity of mainstream, the air intake velocity of the cavity and the structure of the holder exert significant influence on the air entrainment, while the influence of structural proportion of the cavity is comparatively insignificant. The square root of momentum ratio of cavity air to mainstream air could be used to analyze the correlation of the entrainment data