Hot working environment not only affects work efficiency, but also poses a potential threat to the physical and mental health of staff. The current common method for dealing with high temperatures is spray-only or ventilation-only. To investigate the impact of different spray and ventilation modes on indoor high-temperature environments, this study examined their effects on indoor environmental parameters, average skin temperature, and psychological indicators. By establishing an experimental platform for high-temperature thermal environments, a spray ventilation cooling system was implemented, and its cooling efficacy in the indoor thermal environment was analyzed. The environmental classification of the high-temperature working environment under experimental conditions is provided based on the experimental data. A comparison and analysis of environmental parameters and physiological and psychological indicators between moderate and high-temperature environments were conducted. The combination of spray and ventilation modes resulted in a 5.3 °C reduction in air temperature, a 24.1% increase in average relative humidity, and a 3.3 °C reduction in average Wet-bulb Globe Temperature (WBGT). The cooling effect was increased by 2.3 °C and the average relative humidity was increased by 10.8% compared to spray-only and ventilation-only modes. In spray and ventilation mode, when the spray volume is increased by 15 mL/min, the air temperature is reduced by 8.2 °C, the average relative humidity is increased by 31.9%, and the average WBGT is reduced by 5.1 °C. This study has guiding significance for finding a reasonable cooling scheme to cope with indoor high-temperature environments.

Capillarity influences the long-term stability of the dam greatly and affects the sustainable development of tailings dam. The online monitoring capillary water rise test system was independently developed by SM3001B temperature and humidity sensor, SU9101B RS485 converter, SV3010 data acquisition system, and other equipment to carry out the whole process test of water absorption and water release of tailings with different particle sizes. The results show that the capillary rising trend of tailings with different particle sizes is basically consistent, the relationship between the rising height and the diameter are negatively correlated, and the logarithm function can better fit the height of capillary rising over time well enough. The water content of tailing capillary zone decreases with the height, and the smaller the size of tailings, the greater the change of water content. The water release process of tailings is an unsaturated permeability process, which largely depends on the saturation before water release. The larger the particle size of tailings is, the smaller the water content after water release. Based on the above results, the relationship between capillary diameter and tailings particle size was discussed, and the relationship formula between water content change and particle size was deduced. The research results systematically show the water migration law under the tailing capillaries. It is suggested that the unsaturated tailings water content index should be added in the monitoring of the saturated surface of tailings dam.