Significant advances have been made in the development of plasmonic devices in the past decade. Plasmonic nanolasers, which display interesting properties, have come to play an important role in biomedicine, chemical sensors, information technology and optical integrated circuits. However, nanoscale plasmonic devices, particularly those operating in the ultraviolet regime, are extremely sensitive to the metal and interface quality. Thus, these factors have a significant bearing on the development of ultraviolet plasmonic devices. Here, by addressing these material-related issues, we demonstrate a low-threshold, high-characteristic-temperature metal-oxide-semiconductor ZnO nanolaser that operates at room temperature. The template for the ZnO nanowires consists of a flat single-crystalline Al film grown by molecular beam epitaxy and an ultrasmooth Al2O3 spacer layer synthesized by atomic layer deposition. By effectively reducing the surface plasmon scattering and metal intrinsic absorption losses, the high-quality metal film and the sharp interfaces formed between the layers boost the device performance. This work should pave the way for the use of ultraviolet plasmonic nanolasers and related devices in a wider range of applications.
We have designed and fabricated high-performance single-photon avalanche diodes (SPADs) by using 0.18-µm high-voltage CMOS technology. Without any technology customization, the SPADs have low dark-count rate, high photon-detection probability, low afterpulsing probability, and acceptable timing jitter and breakdown voltage. Our design provides a low-cost and high-performance SPAD for various applications.
Single-photon avalanche diodes (SPADs) in complementary metal-oxide-semiconductor (CMOS) technology have excellent timing resolution and are capable to detect single photons. The most important indicator for its sensitivity, photon-detection probability (PDP), defines the probability of a successful detection for a single incident photon. To optimize PDP is a cost- and time-consuming task due to the complicated and expensive CMOS process. In this work, we have developed a simulation procedure to predict the PDP without any fitting parameter. With the given process parameters, our method combines the process, the electrical, and the optical simulations in commercially available software and the calculation of breakdown trigger probability. The simulation results have been compared with the experimental data conducted in an 800-nm CMOS technology and obtained a good consistence at the wavelength longer than 600 nm. The possible reasons for the disagreement at the short wavelength have been discussed. Our work provides an effective way to optimize the PDP of a SPAD prior to its fabrication.
We report on the magnetic response of negative trions in single self-assembled InAs/GaAs quantum dots. Unlike the conventional quadratic diamagnetic shift for neutral excitons, the observed diamagnetic shifts are small and nonquadratic. In particular, we also observed a reversal in sign of the conventional diamagnetic shift. A theoretical analysis indicates that such anomalous behaviors for arise from an apparent change in the electron wave function extent after photon emission due to the strong Coulomb attraction induced by the hole in its initial state. This effect can be very pronounced in small quantum dots, where the electron wave function becomes weakly confined and extended much into the barrier region. When the electrons gradually lose confinement, the magnetic response of will transit gradually from the usual quadratic diamagnetic shift to a quartic dependence, and finally into a special paramagnetic regime with an overall negative energy shift.
We studied the role of reduced dimensionality and disorder in the superconducting properties of wafer-scale aluminum (Al) nanofilms. This new generation of ultrathin films were grown using molecular beam epitaxy and depict normal-state sheet resistance at least 20 times lower than the quantum resistance . Defying general expectations, the superconducting transition temperature of our films increases with decreasing Al film thickness, reaching 2.4 K for a 3.5-nm-thick Al film grown on GaAs: twice that of bulk Al (1.2 K). Surface phonon softening is shown to impact superconductivity in pure ultrathin films, offering a route for materials engineering in two dimensions.
4 December 2017 in Journal of Lightwave Technology
Crosstalk between single-photon avalanche diodes (SPADs) fabricated by the standard CMOS process is extensively investigated. The dependence of device structure, device-to-device distance, and bias voltage on crosstalk has been experimentally studied. Our work reveals that direct-path optical crosstalk dominates in these CMOS SPADs, which is also confirmed with the first time-correlated crosstalk measurement. This work is valuable for SPAD array design and optimization in CMOS technology.