Study on chitosan modification by swelling and crosslinking and its application as a selective adsorbent for heavy metals Cr (VI) in batik industry wastes was done. Swelling is intended to improve chitosan porosity, whereas crosslinking is to increase the resistance of chitosan against acid. Natural samples are generally acidic, thus limiting chitosan application as an adsorbent. Modification of chitosan by combining swelling and crosslinking is expected to increase its adsorption capacity in binding heavy metal ions in water. The modified chitosan was later contacted with Cr (VI) to test its adsorption capacity with a variation of pH and contact time. Finally, application of modified chitosan was done in batik industry waste containing Cr (IV). Based on the results, chitosan-ECH 25% (v / v) was the optimum concentration of crosslinker to adsorb Cr (VI) ions. Modified chitosan has a solubility resistance to acids, even though a strong acid. Modification of chitosan also improved its adsorption capacity to Cr (VI) from 74% (pure chitosan) to 89% with contact time 30 min at pH 3. On the application to the batik wastes, the modified chitosan were able to adsorb Cr (IV) up to the level of 5 ppm. Thus, the modified chitosan has a potential to be applied to as an adsorbent of Cr (VI) in batik industry wastes.
Chitosan membrane is unstable in acidic conditions thus it has limitations when applied as drug delivery material. Therefore, chitosan modification needs to be
1 April 2018 in IOP Conference Series: Materials Science and Engineering
Cheaply and abundantly biosorption available materials such as carrot peels can be a cost-efficient method for removing heavy metals from wastewater. To investigate the role pectin plays in metal binding by carrot peels, commerce pectin was compared. FTIR spectra confirmed the presence of carboxyl and hydroxyl groups in commerce pectin and carrot pectin. Isoterm experiments showed that all materials could remove Pb (II) ion. All of materials binding Pb (II) follow Freundlich models adsorption. The commerce pectin bindsPb (II) by involving energy 16.6 KJ/mole whereas pectin from carrot peel involves energy 21.09 KJ/mole. It indicates that commerce pectin binds the Pb (II) by physics adsorption whereas pectin from carrot peel by physics and chemical adsorption.
A modified pectin has been synthesized by reacting/combining -OH group among pectin and chitosan with BADGE (Bisphenol A diglycidyl ether) crosslinker agent. The structure and morphology of the new material were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and X-ray Diffraction (XRD) analysis. Thermogravimetric studies showed an improvement in thermal characteristic. Adsorption experiments were performed in batch processes; sorption isotherms and kinetics were also studied. The Langmuir and Freundlich adsorption isotherm models were applied to describe the isotherms and isotherm constants for the adsorption of Pb(II) ion onto adsorbent pectin-carboxymethyl chitosan-BADGE (pec-CMC-BADGE). The dynamic study showed that the sorption process followed the second-order kinetic equation. Result indicated also that Pb(II) ion uptake could be well described by the Langmuir and Freundlich adsorption model of pec-CMC-BADGE and CMC with DG° of 25.3 and 23.1 kJ mol-1,respectively, while that of pectin followed Freundlich isotherm with DG° of 16.6 kJ mol-1.
1 September 2019 in IOP Conference Series: Materials Science and Engineering
Environmental pollution due to the disposal of colored substances can endanger both the environment and humans. For this reason, the presence of dyes pollutants needs to be reduced, where adsorption method has become one of the alternative. Research on synthesis of modified chitosan to pectin polyelectrolyte complex (PEC) Chi-Pec has been carried out in order to improve the characteristic of chitosan as adsorbent. The research was done by mixing chitosan solution in acetic acid with pectin solution in water for 3 hours stirring. The solution was then printed out into a polypropylene container and dried. The formed membrane was characterized using FTIR to identify functional groups, XRD and SEM to analyze their physical characteristic. The results showed that the Chi-Pec adsorbent had stability and resistance to the acidic environment. Characterization results using FTIR showed that the adsorbent has functional group of amine, carboxyl and hydrogen. The results of XRD show that the adsorbent was not crystalline. Furthermore, SEM data shows a solid structure of the adsorbent.