Carbon-doped nanostructured CuMo-based photocatalysts were prepared by solvothermal synthesis. Two thermal treatments—oxidative and inert atmosphere—were used for the synthesis of the catalysts, and the influence of spherical carbon structures upon the crystalline phases on the photocatalytic activity and stability was studied. XRD showed the catalysts are nanostructured and composed by a mixture of copper (Cu, Cu2O, and CuO) and molybdenum (MoO2 and MoO3) crystalline phases. The catalysts were used for the degradation of yellow 5 under solar light. A remarkable leaching of Mo both in dark and under solar irradiation was observed and quantified. This phenomenon was responsible for the loss of photocatalytic activity for the degradation of the dye on the Mo-containing series. Conversely, the Cu-based photocatalysts were stable, with no leaching observed after 6 h irradiation and with a higher conversion of yellow 5 compared with the Mo- and CuMo series. The stability of Cu-based catalysts was attributed to a protective effect of spherical carbon structures formed during the solvothermal synthesis. Regarding the catalysts’ composition, sample Cu4-800-N2 prepared by pyrolysis exhibited up to 4.4 times higher photoactivity than that of the pristine material, which is attributed to a combined effect of an enhanced surface area and micropore volume generated during the pyrolytic treatment due to the presence of the carbon component in the catalyst. Scavenger tests have revealed that the mechanism for tartrazine degradation on irradiated Cu-based catalysts involves successive attacks of •OH radicals.
Glycerol hydrogenolysis to 1,2-propanediol (1,2-PDO) was performed over activated carbon supported copper-based catalysts. The catalysts were prepared by impregnation using a pristine carbon support and thermally-treated carbon supports (450, 600, 750, and 1000 °C). The final hydrogen adsorption capacity, porous structure, and total acidity of the catalysts were found to be important descriptors to understand catalytic performance. Oxygen surface groups on the support controlled copper dispersion by modifying acidic and adsorption properties. The amount of oxygen species of thermally modified carbon supports was also found to be a function of its specific surface area. Carbon supports with high specific surface areas contained large amount of oxygen surface species, inducing homogeneous distribution of Cu species on the carbon support during impregnation. The oxygen surface groups likely acted as anchorage centers, whereby the more stable oxygen surface groups after the reduction treatment produced an increase in the interaction of the copper species with the carbon support, and determined catalytic performances.
An MCM-41-SO3H catalyst with 14 wt% S was successfully synthesized to be used in furfural production from xylose and hemicellulose in a biphasic n-butanol/water system. The precursor MCM-41 and the acid-functionalized MCM-41-SO3H catalyst were characterized by XRD, FTIR, TEM, N2 physisorption, ICP-MS, TPD-NH3, and XPS. The characterization results indicated that the sulfonic process partially decreased the ordered mesoporous structure and increased the acid strength of the initial MCM-41. The catalytic performance of the xylose conversion was evaluated in a batch-type reactor using different biphasic ecological and renewable n-butanol/water ratios (1:1, 1.5:1, 2:1, and 2.5:1) as dissolvent at 170 °C. The effect of the dissolvent mixture was clearly seen from the larger initial reaction rate and TOF values for the 1.5:1 ratio. This catalytic behavior indicated that a proper proportion of n-butanol/water dissolvent mixture enhanced the solubility of the substrate in the n-butanol-rich mixture and prevented the deactivation of acidic sulfonated surface groups. To achieve transformation of lignocellulosic raw material to value-added products, the MCM-41-SO3H catalyst was also used for the production of furfural. The recycling evaluation tests indicated that for the recovered catalyst submitted to a sulfonation process, the yield of furfural was closer to the fresh catalyst.