Hydrotalcite-supported Pd–Au nanocatalysts were found to be efficient heterogeneous catalysts for Ullmann homocoupling reactions of aryl bromides or chlorides at 25 or 40 °C, which could be due to the ensemble effect and increased electron density of Pd sites on Pd–Au nanoparticles, and the assistant role of the hydrotalcite for the reversion of the catalytic active center, Pd(0).
Boron-based catalysts for oxidative dehydrogenation of propane (ODHP) have displayed excellent olefin selectivity. However, the drawback of deboronation leading to catalyst deactivation limited their scalable applications. Hereby, a series of mesoporous B-MCM-41 (BM-x, B/Si = 0.015–0.147) catalysts for ODHP were prepared by a simple hydrothermal synthesis method. It was found that propane conversion was increased and the initial reaction temperature was reduced with an increase of boron content, and the optimal values appeared on BM-2.0 (B/Si = 0.062), while olefins’ (ethylene and propylene) selectivity was maintained at ca. 70–80%. Most importantly, BM-1.0 (B/Si = 0.048) exhibited favorable activity, stability, and water tolerance after washing treatment or long-time operation (e.g., propane conversion of ca. 15% and overall olefin selectivity of ca. 80% at 550 °C) because its high structural stability prevented boron leaches. These features were identified by X-ray diffraction (XRD), N2 physisorption, inductively coupled plasma-mass spectrometry (ICP-MS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and solid-state magic-angle-spinning nuclear magnetic resonance (MAS NMR) spectroscopy studies. The tri-coordinated B–OH species incorporated into the mesoporous silica framework are considered to be the active sites for ODHP.
29 March 2023 in International Journal of Hydrogen Energy
A series of NiV mixed metal oxide (MMO) catalysts were derived from the NiV layered double hydroxides (LDHs) synthesized by the constant pH coprecipitation method. The synthesis parameters, (i) Ni/V molar ratio and (ii) calcination temperature ( Tp), were controlled. The MMO catalysts were characterized by physicochemical characterization techniques and then tested for the oxidative dehydrogenation of propane (ODHP). The results showed that the calcination temperature affected the crystalline phase formation and grain size of NiO, as well as the activated temperature of propane, and the addition of V greatly regulated the activity and quantity of the surface oxygen species and improved the propylene selectivity. 4NiV-500 catalyst (Ni/V = 4, Tp = 500 °C) exhibited the best catalytic performance at low temperature (250 °C) with an initial propylene selectivity of about 70%. Therefore, it is an effective method to obtain NiV MMO catalysts with excellent low-temperature activity for ODHP, using LDHs as the precursors while controlling the appropriate amount of V and calcination temperature simultaneously.