Joints are the most critical component of reticulated shell structures, and their hysteretic performance is crucial to the mechanical properties of the whole reticulated shell structure under seismic action. Therefore, the hysteretic behaviour of aluminium alloy flower-gusset composite joint for an out-of-plane bending moment was studied by experiments and numerical analysis. The results show that the hysteretic curves of flower-gusset composite joints and gusset joints contain four stages: an elastic stage, a bolt slip stage, a hole wall pressure-stiffness degradation stage and a failure stage. The hysteretic performance of the new flower-gusset composite joint is obviously better than that of the traditional plate joint. With the increase in the thickness of the cover plate, the bending stiffness of the flower-gusset composite joint increases significantly, while the rotational deformation decreases. Then, a restoring force model of the flower-gusset composite joint is proposed through theoretical analysis based on experiments and numerical analysis.
Long-span space structures are particularly sensitive to their self-weight. In this paper, a honeycomb plate with a high strength and light weight is reliably connected to a single-layer aluminium alloy lattice shell to form a new type of combined lattice shell structure, which substantially improves the overall stiffness and stability of the lattice shell without a plate. The bending performance of the aluminium alloy honeycomb panel-beam combined grid structure (AAH combined grid structure) plays a key role in the stability of the combined lattice shell structure. Therefore, the bending performance of the AAH combined grid structure was studied through six groups of tests and refined finite element models. Then, the calculation formula for the equivalent bending stiffness of the AAH combined grid structure was obtained through a theoretical analysis. The results show that the contribution of the honeycomb structure to the stiffness of the structure is very obvious, and the proposed formula provides the theoretical basis and a practical method for the engineering design of new aluminium alloy combined lattice shell structures in the future.
Steel-timber composite structures are a novel hybrid structural system that combines the advantages of both steel and wood structures, holding great promise for various applications. In this paper, the seismic behaviors of steel- timber composite columns are investigated based on finite element analysis. The reliability of the finite element model is validated by quasi-static test results. Numerical analysis results indicate that the proposed steel- timber composite systems is with high ultimate bearing capacity, full hysteresis loops, and strong displacement ductility, demonstrating excellent seismic performance. The axial compression ratio, steel tube thickness, and flexural point height significantly influence the seismic resistance of the structure.
25 September 2023 in Advances in Structural Engineering
This study investigates the shear connection performance of steel-wood composite members, using both experimental research and numerical analysis. The experimental investigation explores the impact of glue length and thickness on the performance of the glue connection, while also examining the effects of bolt spacing, bolt number, and bolt diameter on the performance of the bolt connection. Furthermore, a comparative analysis is conducted to assess the performance differences among different types of connections, namely glue connection, bolt connection, and composite connection. Subsequently, a numerical analysis model is developed and validated by comparing it with the experimental results. The numerical analysis verifies the shear transfer mechanism of interfaces with various connection modes. Building upon the understanding of the shear transfer mechanism, an equation is derived to calculate the shear bearing capacity of the interface. The validity of this equation is demonstrated through the test results. The findings presented in this paper establish a robust theoretical foundation for future research, development, and engineering applications related to steel-wood composite members.
16 August 2024 in Advances in Structural Engineering
This article takes STC long and short columns as the research objects, and first conducts quasi-static tests to preliminarily explore the failure characteristics of STC long and short columns under horizontal reciprocating loads. Then, a large number of numerical analysis models are established to explore the influence of coaxial compression ratio, steel pipe wall thickness, wood cross-sectional area, and bending point height on the seismic performance of STC long and short columns through numerical analysis. The results indicate that although the trend of changes in STC long columns and short columns under these factors is the same, STC long columns mainly resist bending and compression, while STC short columns mainly bear shear and bending resistance. Finally, the calculation formulas for the compressive bending bearing capacity of STC long columns and the shear bending bearing capacity of STC short columns were derived through theoretical analysis. The accuracy and safety of the formulas were verified through a large number of numerical simulation results.