This study was aimed at assessing the spatial and temporal distribution of surface water quality variables of the Xin’anjiang River (Huangshan). For this purpose, 960 water samples were collected monthly along the Xin’anjiang River from 2008 to 2017. Twenty-four water quality indicators, according to the environmental quality standards for surface water (GB 3838-2002), were detected to evaluate the water quality of the Xin’anjiang River over the past 10 years. Principal component analysis (PCA) was used to comprehensively evaluate the water quality across eight monitoring stations and analyze the sources of water pollution. The results showed that all samples could be analyzed by three main components, which accounted for 87.24% of the total variance. PCA technology identified important water quality parameters and revealed that nutrient pollution and organic pollution are major latent factors which influence the water quality of Xin’anjiang River. It also showed that agricultural activities, erosion, domestic, and industrial discharges are fundamental causes of water pollution in the study area. It is of great significance for water quality safety management and pollution control of the Xin’anjiang River. Meanwhile, the inverse distance weighted (IDW) method was used to interpolate the PCA comprehensive score. Based on this, the temporal and spatial structure and changing characteristics of water quality in the Xin’anjiang River were analyzed. We found that the overall water quality of Xin’anjiang River (Huangshan) was stable from 2008 to 2017, but the pollution of the Pukou sampling point was of great concern. The results of IDW helped us to identify key areas requiring control in the Xin’anjiang River, which pointed the way for further delicacy management of the river. This study proved that the combination of PCA and IDW interpolation is an effective tool for determining surface water quality. It was of great significance for the control of water pollution in Xin’anjiang River and the reduction of eutrophication pressure in Thousand Island Lake.
1 January 2021 in Ecotoxicology and Environmental Safety
A novel material that nano zero valent iron (nZVI) loaded on biochar with stable starch stabilization (nZVI/SS/BC) was synthesized and used for the removal of hexavalent chromium [Cr(VI)] in simulated wastewater. It was indicated that as the pyrolysis temperature of rice straw increased, the removal rate of Cr(VI) by nZVI/SS/BC first increased and then decreased. nZVI/SS/BC made from biochar pyrolyzed at 600 °C (nZVI/SS/BC600) had the highest removal efficiency and was suitable for a wide pH range (pH 2.1-10.0). The results showed that 99.67% of Cr(VI) was removed by nZVI/SS/BC600, an increase of 45.93% compared to the control group, which did not add soluble starch during synthesis. The pseudo-second-order model and the Langmuir model were more in line with reaction. The maximum adsorption capacity for Cr(VI) by nZVI/SS/BC600 was 122.86 mg·g-1. The properties of the material were analyzed by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) mapping, Brunauer-Emmett-Teller (BET), Fourier-transform infrared (FTIR), and X-ray diffraction (XRD). The results showed that the nZVI particles were uniformly supported on the biochar, and the BET surface areas of nZVI/SS/BC was 40.4837 m2·g-1, an increase of 8.79 times compared with the control group. Mechanism studies showed that soluble starch reduced the formation of metal oxides, thereby improving the reducibility of the material, and co-precipitates were formed during the reaction. All results indicated that nZVI/SS/BC was a potential repair material that can effectively overcome the limitations of nZVI and achieve efficient and rapid repair of Cr(VI).
8 January 2020 in Environmental Science and Pollution Research
The influence of the preparation process (including the sulfurization method, sulfur reagents, and S/Fe molar ratio) and the reaction conditions of decontamination (pH value of the initial solution, reaction temperature, etc.) on the decontamination effect was quantitatively evaluated through meta-analysis. The results showed that compared with nZVI, S-nZVI increased the removal efficiency of heavy metals by 56.83% [95% CI: 32.31%, 85.89%] and the degradation efficiency of organic contaminants by 118.15% [95% CI: 85.89%, 156.00%]. Specifically, the analysis of key factors regarding the preparation process revealed that S-nZVI with Na2S2O4 and Na2S as sulfur reagents significantly improved the removal effect on heavy metals and the degradation effect on organic contaminants, respectively. In the range of S/Fe molar ratios of 0.3–0.5, the decontamination ability of S-nZVI was significantly improved compared with nZVI. The analysis results of decontamination reaction conditions showed that the removal of heavy metals by S-nZVI was significantly improved in acidic and neutral solutions compared to nZVI, while the improved degradation performance of organic pollutants was more pronounced in alkaline solutions. Overall, this study provided a comprehensive examination of the factors affecting the remediation performance of S-nZVI and provided the optimal preparation process and decontamination conditions.