High-volume-fraction SiCp/Al composites have attracted considerable interest for their excellent thermo-physical properties. However, popularization of high volume fraction SiCp/Al composites is still hampered by their poor machinability. In this study, the influences of the cutting speed and feed rate on the drilling performance of SiCp/Al composites with 56% SiC particles were investigated experimentally. The drilling characteristics were evaluated in terms of drilling forces, tool wear, and the surface quality of drilled-hole. It was found that the feed rate is one of the main cutting parameters that affect the drilling performance, while the cutting speed has no significant effect on the thrust force.
In order to enhance the mechanical property of auxetic lattice structures, a new enhanced auxetic lattice structure was designed by embedding narrow struts into a three-dimensional (3D) re-entrant lattice structure. A series of enhanced lattice structures with varied parameters were fabricated by 3D printing combined with the molten metal infiltration technique. Based on the method, parameter studies were performed. The enhanced auxetic lattice structure was found to exhibit superior mechanical behaviors compared to the 3D re-entrant lattice structure. An interesting phenomenon showed that increasing the diameter of connecting struts led to less auxetic and non-auxetic structures. Moreover, the compressive property of the enhanced structure also exhibited obvious dependence on the base material and compression directions. The present study can provide useful information for the design, fabrication and application of new auxetic structures with enhanced properties.
9 December 2011 in The International Journal of Advanced Manufacturing Technology