The purpose of this study was to obtain polyamide 6 nanocomposites with national organically modified clay with three quaternary ammonium salts. The obtained results confirm the intercalation of molecules of salt in the clay layers, and a good interaction with the polymer, showing the formation of intercalated and/or partially exfoliated structures. The nanocomposites showed similar thermal stability compared to pure polymer, and the mechanical properties presented interesting and promising results.
1 January 2020 in Revista Brasileira de Enfermagem
Objectives: To identify the knowledge and practice of primary care nurses about the social network approach for families of children with chronic diseases. Methods: Qualitative research, conducted by means of interviews with 23 family health nurses, from one municipality in Paraíba and one in Rio de Janeiro, from June to July of 2017. The data were interpreted using thematic analysis. Results: Social network meant institutional support offered by services outside the unit, and socioeconomic problems involved the family context. In practice, nurses find it difficult to provide comprehensive care and establish ties with families. When referring to other professionals, a weakness in the counter-referral to the family health unit is found. Final considerations: Some gaps were found regarding the knowledge and practice of nurses regarding the social network approach, which requires professional training to strengthen social relationships and the necessary support for families of children with chronic diseases.
The aim of this work was to prepare hollow fiber membrane changing the composition of polyethersulfone, polyvinylpyrrolidone (PVP) and clay, through the phase inversion technique, evaluating the influence of these constituents on the viscosity and distinct morphologies. Flat membranes were produced and their contact angles were determined and showed difference when clay was added and/or PVP. For the hollow fiber membranes, the +addition of these constituents, PVP and/or clay in the solution, can change significantly the viscosity and effect the membrane formation. From the scanning electron microscopy (SEM) images, it was identified the influence on morphology with the compositional variation of each additive, with the PVP promoting shorter precipitation time, favoring the formation of pores of the “fingers” type and increasing the presence of macrovoids. The addition of clay favored the formation of spherical pores, reducing the presence of macropores.
Membranes have been widely used in the treatment of industrial effluents. However, there are still some limitations in the separation and permeability with respect to these effluents. Therefore, this study investigated the addition of 1% and 5% of an inorganic filler (clay) in polyethersulfone polymer membranes. By contact angle analysis, it was observed that the clay influenced the hydrophilicity of the membrane. The presence of the clay had an important role in the morphology of the membrane, modifying and favoring a greater quantity of pores and macropores for the porous support. For the tensile test, it was seen that the high clay content decreased the membranes properties. The flow tests, having a flow stabilized around 300 L/h·m2 for membranes containing clay, evidenced the efficiency of the membrane for the treatment of indigo blue, representing a 200% increase in relation to polyethersulfone membrane. The membrane containing 1% of clay presented the highest level of rejection to the effluent, around 94.0%. Thus, it was evident that the addition of montmorillonite clay modified the membrane structure contributing to a higher selectivity and permeability.
O objetivo deste trabalho foi avaliar o efeito do compatibilizante PE-g-MA (5 e 10%) no comportamento reológico de nanocompósitos de poliamida6/polietileno/argila organofílica, onde a argila foi tratada com um sal quaternário de amônio (Cetremide). Em geral, observou-se que a presença do compatibilizante aumentou o torque da mistura de PA6/PE e que a presença da argila organofílica (2%) sem o compatibilizante não pareceu alterar o comportamento do torque da mistura. Por outro lado, para o nanocompósito com 10% em peso de compatibilizante e com a argila organofílica, verificou-se um aumento significativo do torque em relação às outras misturas, evidenciando maior interação da argila organofílica com as matrizes poliméricas, isto é, maior viscosidade do sistema, promovida provavelmente pela presença do compatibilizante. Os resultados de difração de raio X mostraram que os sistemas apresentaram estrutura intercalada e/ou esfoliada.