Romain Lemaire

Prof. Dr. Romain Lemaire


Research Focus & Metrics

Academic Career Length

37Years (1990-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 March 2024 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Open access
PDF file
OFOlivier Fischer
Olivier Fischer
RLRomain Lemaire
Romain Lemaire
ABAmmar Bensakhria
Ammar Bensakhria
This work aims at comparing the ability of 7 modeling approaches to simulate the pyrolysis kinetics of spruce wood, wheat straw, swine manure, miscanthus and switchgrass. Measurements were taken using a thermogravimetric analyzer (TGA) with 4 heating rates comprised between 5 and 30 K min−1. The obtained results were processed using 3 isoconversional methods (Kissinger–Akahira–Sunose (KAS), Ozawa–Flynn–Wall (OFW) and Friedman), 1-step and 3-step Kissinger models, as well as an advanced fitting method recently proposed by Bondarchuk et al. [1] (Molecules 28:424, 2023, https://doi.org/10.3390/molecules28010424). Seventeen reaction models were considered to derive rate constant parameters, which were used to simulate the variation of the fuel conversion degree $$\alpha$$ α as a function of the temperature $$T$$ T . To complement this benchmarking analysis of the modeling approaches commonly used to simulate biomass pyrolysis, a network model, the bio-CPD (chemical percolation devolatilization), was additionally considered. The suitability of each model was assessed by computing the root-mean-square deviation between simulated and measured $$\alpha =f(T)$$ α = f ( T ) profiles. As highlights, the model-free methods were found to accurately reproduce experimental results. The agreement between simulated and measured data was found to be higher with the Friedman model, followed by the KAS, FWO, 3-step, and 1-step Kissinger models. As for the bio-CPD, it failed to predict measured data as well as the above-listed models. To conclude, although it was less efficient than the Friedman, KAS or OFW models, the fitting approach from Bondarchuk et al. [1] (Molecules 28:424, 2023, https://doi.org/10.3390/molecules28010424) still led to satisfactory results, while having the advantage of not requiring the selection of a reaction model a priori.

24 November 2022 in Catalysts
Verified
Journal Article
Open access
PDF file
WWWei Wang
Wei Wang
RLRomain Lemaire
Romain Lemaire
ABAmmar Bensakhria
Ammar Bensakhria
Denis LuartDenis Luart
Denis Luart
The catalytic pyrolysis of beech wood and corncob was experimentally investigated considering six additives containing alkali and alkaline earth metals (Na2CO3, NaOH, NaCl, KCl, CaCl2 and MgCl2). Thermogravimetric analyses (TGA) were carried out with raw feedstocks and samples impregnated with different concentrations of catalysts. In a bid to better interpret observed trends, measured data were analyzed using an integral kinetic modeling approach considering 14 different reaction models. As highlights, this work showed that cations (Na+, K+, Ca2+, and Mg2+) as well as anions (i.e., CO32−, OH−, and Cl−) influence pyrolysis in selective ways. Alkaline earth metals were proven to be more effective than alkali metals in fostering biomass decomposition, as evidenced by decreases in the characteristic pyrolysis temperatures and activation energies. Furthermore, the results obtained showed that the higher the basicity of the catalyst, the higher its efficiency as well. Increasing the quantities of calcium- and magnesium-based additives finally led to an enhancement of the decomposition process at low temperatures, although a saturation phenomenon was seen for high catalyst concentrations.

8 November 2022 in Molecules
Verified
Journal Article
Open access
PDF file
WWWei Wang
Wei Wang
RLRomain Lemaire
Romain Lemaire
ABAmmar Bensakhria
Ammar Bensakhria
Denis LuartDenis Luart
Denis Luart
This work analyzes the catalytic effects induced by alkali and alkaline earth metals (AAEMs) on pyrolysis kinetics. To this end, thermogravimetric analyses (TGA) were carried out with raw beech wood and samples impregnated with NaCl, KCl and MgCl2 at four heating rates (5, 10, 15 and 30 °C/min). Obtained results showed that AAEM compounds promote the decomposition of biomass by reducing the initial and peak pyrolysis temperatures. More specifically, the catalytic effect of the alkaline earth metal was shown to be stronger than that of alkali metals. To further interpret the obtained trends, a kinetic modeling of measured data was realized using two isoconversional methods (the Ozawa–Flynn–Wall (OFW) and Kissinger–Akahira–Sunose (KAS) models). With a view to identifying a suitable reaction model, model fitting and master plot methods were considered to be coupled with the isoconversional modeling approaches. The 3-D diffusion reaction model has been identified as being well suited to properly simulate the evolution of the conversion degree of each sample as a function of the temperature. Furthermore, the kinetic parameters derived from the present modeling work highlighted significant decreases of the activation energies when impregnating wood with AAEM chlorides, thus corroborating the existence of catalytic effects shifting the decomposition process to lower temperatures. A survey of the speculated pathways allowing to account for the impact of AAEMs on the thermal degradation of woody biomass is eventually proposed to better interpret the trends identified in this work.