Cable-driven continuum robots with hyper-redundant deformable backbones show great promise in applications, such as inspection in unstructured environments, where traditional rigid robots with discrete links and joints fail to operate. However, the motion of existing continuum robots is still constrained by their homogeneous backbones, and limited to environments with modest geometrical complexity. In this study, inspired by highly deformable elephant trunks, we presented a modular tensegrity structure with preprogrammable stiffness for continuum robots. Then we derived a mechanical model based on a positional formulation finite element method for predicting the configuration of the structure in different deformation scenarios. Theoretical predictions revealed that the curvature of each segment could be regulated by preprogramming their spring stiffness. Hence, our customizable design could offer an effective route for efficient robotic interactions. We further fabricated a continuum robot consisting of 12 modules, and showcased its deformation patterns under multiple scenarios. By regulating the distribution of spring stiffness, our robot could move through channels with varying curvatures, exhibiting its potential for applications where varying curvature, and conformal and efficient interactions are needed. Leveraging the inherent intelligence, this robotic system could simplify the complexity of the required actuation and control systems.
Soft robots exhibit promising dexterity and adaptability for manipulation because of their high compliance. However, the existing soft robots with invariant stiffness hardly interact with cluttered environments with varying curvatures. In this study, inspired by the maneuverability of an elephant trunk, we proposed a pneumatic soft robot comprised of soft pneumatic actuators and interference plates. By implementing interference plates in diverse patterns, the localized stiffness of our robot can be pre-programmed. To quantify the availability of localized stiffness regulation, we constructed four typical assembly fashions strengthened by the interference plates, and predicted robot profiles by simulation that was validated via experiments. We demonstrated the application of our soft robot with localized stiffness regulation in a variety of scenarios demanding specific configurations. Our design paradigm not only uncovers the potential methodology for regulating robotic curvature precisely, but may inspire next-generation soft robots integrating specified structural and material characteristics learned from natural intelligence.
12 April 2022 in IEEE Robotics and Automation Letters
Cable-driven continuum robots exhibit accessing and manipulation capabilities in constrained and cluttered environments that are unachievable for traditional robots composing of discrete links and joints. However, the existing continuum robots structured by non-scalable backbones are monofunctional, merely capable of providing bending degree of freedom, not allowing regional elongation that is necessary for dexterous manipulation. In this paper, we present a particular tensegrity topology for the continuum robotic design with an additional stretching degree of freedom, by which the robot can achieve high flexibility in both bending and contraction motion patterns for more configurable operations. To quantify kinematics of the robot under various motion patterns, we build a mechanical model following a positional formulation finite element method. Guided by the theoretical results, a triple-segmented continuum robot is designed and fabricated. To reduce the control complexity, we regulate the individual stiffness of each segment, by which the motion coupling among the segments can be eliminated. Moreover, we also demonstrate the potential applications of this robotic design in tasks of traveling through holes and avoiding obstacles.
Compliant grasping is an important function of continuum robots that interact with humans and/or unpredictable environments. However, the existing robots often have cross‐sections that remain constant along their length. This causes the robots to exhibit poor grasping ability, especially when dealing with objects with diverse curvatures. Here, inspired by the high adaptability of seahorse tails in grasping, a cable‐driven continuum robot with tapered tensegrity, capable of conformally grasping objects with various curvatures is proposed. To characterize the effects of tapering on robotic kinematics, a mechanical model is derived using a multi‐body dynamic framework for both predicting the configuration and developing a control strategy for cables. Theoretical predictions indicate that the curvature of each unit can be regulated by altering the length of the cables, allowing the robot to conform to objects with curvatures ranging from 1.48 to 28.21 m−1. Further, a continuum robot is employed, and the control strategy that can be used for grasping floating objects when the curvature of the objects is used as the input is tested. The robotic design, which presents an example of embedded physical intelligence, can inspire in situ characterization techniques for collecting floating contaminants.