Jiajun Zhang

Mr. Jiajun Zhang


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 November 2020 in IEEE Access
Verified
Journal Article
Open access
JZJiajun Zhang
Jiajun Zhang
WWWeiqing Wang
Weiqing Wang
HWHaiyun Wang
Haiyun Wang
JWJiahui Wu
Jiahui Wu
XLXiaozhu Li
Xiaozhu Li
JLJiongfeng Lan
Jiongfeng Lan
With the increased distributed generation (DG) and the combination of residential, commercial, and industrial loads connected to the distribution networks, it is more difficult to ensure the safe and economic operation of the distribution networks because of the great volatility and randomness of DG and complex loads. In this paper, with the aim of minimizing network loss, load balance, and maximum voltage deviation, a multiobjective reconfiguration model of the distribution network is established under the condition of satisfying network constraints. Moreover, a new social beetle swarm optimization algorithm (SBSO) considering two social behaviors is adopted to solve the complex problem according to the characteristics of the distribution network reconfiguration (DNRC). Based on the SBSO algorithm, grey target decision-making (GTDM) strategy is used to choose the best beetle in the process of solving the multiobjective problem. Additionally, The grey relation projection (GRP) method is used to divide the time period of DNRC according to the change of DG and loads in a day, in order to reduce the number of switching operations. Finally, the effectiveness of the proposed multiobjective model and algorithm are verified on the standard IEEE-33 system and IEEE-69 system.

4 November 2020 in IEEE Access
Verified
Journal Article
Open access
JZJiajun Zhang
Jiajun Zhang
WWWeiqing Wang
Weiqing Wang
HWHaiyun Wang
Haiyun Wang
JWJiahui Wu
Jiahui Wu
JWJie Wang
Jie Wang
With the increased distributed generation (DG) and electric vehicle (EV) load penetration in distribution networks, it is more difficult to ensure the safe and economic operation of the distribution networks because of the great volatility and randomness of DG and EV loads. In this paper, the uncertainties of wind power, photovoltaics, conventional loads, and EV loads are considered. Photovoltaics and conventional loads are related to solar radiation, and they are subtracted to form the net load. Then, the Wasserstein distance is used to divide the scene, and K-means clustering is used to reduce the scene, so the reconstruction analysis is carried out in the limited typical scene. In addition, to minimize network loss, load balance and maximum voltage deviation, a multiobjective game reconstruction model of the distribution network is established under the condition of satisfying network constraints. Moreover, the social beetle swarm optimization algorithm considering two social behaviors is adopted to solve the complex problem. Finally, the simulation results are verified on the standard IEEE-33 system and IEEE-118 system. The results show that the proposed strategy and algorithm can effectively reduce the network loss, improve the node voltage level and ensure that the load is not overloaded.

12 December 2021 in International Transactions on Electrical Energy Systems
Verified
Journal Article
Closed access
PDF file
JZJiajun Zhang
Jiajun Zhang
WWWeiqing Wang
Weiqing Wang
HWHaiyun Wang
Haiyun Wang

17 October 2023
Verified
Book Chapter
Open access
PDF file
SZShiqiang Zhang
Shiqiang Zhang
JZJiajun Zhang
Jiajun Zhang
MLMing Lei
Ming Lei
Mobile lifting jack is one of the important equipment to CRH train overhaul, mostly in the manual mobile lifting jack. The JC-17B mobile lifting jack is often used as a lifting jack of CRH, which can implement lifting operations of 8 and 16 trains simultaneously. The mobile lifting jack mainly consists of the rack, transmission device, head supporting portion, walking device and other components. For efficiency, some structural modifications have been carried out, with electric pushing rods used for the expansion and contraction of the head supporting portion, and motor drive used for the walking device. At the same time, the original motor has been modified from the traditional top installation to the bottom installation to facilitate the maintenance of the lifting jack. Rack as an important component bears all loads, and its mechanical properties, especially the strength, play an important role in the normal operation of the entire equipment. This is the use of modern design method, using Pro/E, ANSYS and other modern engineering software platform, to do mechanical and modal analysis for rack on JC-17B mobile lifting jack, complete the rack design optimization, The analysis results show that the maximum stress is, which does not exceed the yield limit. Additionally, the thickness of the rack is reduced by 2mm, and the mass is reduced by 21.9%, thereby having saved materials and reduced production costs. Practice has proved that the mobile lifting jack developed based on the optimization method in this paper works well in actual operation, and for the future of all types of mobile lifting jack development, technological transformation and equipment renewal provides a reliable basis for the design.

17 October 2024
Verified
Book Chapter
Open access
PDF file
SZShiqiang Zhang
Shiqiang Zhang
JZJiajun Zhang
Jiajun Zhang
ZZZhixia Zhang
Zhixia Zhang
KMKuan Meng
Kuan Meng
Mobile lifting jack is one of the key equipment necessary for the maintenance base of EMU. At present, manual mobile lifting jack is the most widely used. The mobile lifting jack is mainly composed of frame, transmission device, bracket part, base and other parts. The frame is the main bearing part, and its safety and stability have an important impact on the normal use of the whole mobile lifting jack. In this paper, Pro/E, ANSYS and other modern engineering software platform are used to analyze the stress, strain and buckling mode on the frame of JC-17B mobile lifting jack. The results show that the maximum equivalent stress of the frame 3000mm away from the rail surface is 107.927MPa, which meets the strength requirements. The first and second order vibration frequencies of the frame are low, close to the frequency of the vibration source, and there is a danger of resonance, so try to avoid it. The research results provide a reliable theoretical basis for the development, technical transformation and equipment update of various types of frame in the future.

17 October 2024
Verified
Book Chapter
Open access
PDF file
SZShiqiang Zhang
Shiqiang Zhang
JZJiajun Zhang
Jiajun Zhang
KMKuan Meng
Kuan Meng
ZZZhixia Zhang
Zhixia Zhang
A structure scheme of a high efficient saw blade polishing machine was proposed. The machine was vertical and could polish two saw blades at the same time, and the polishing machine has a small area and high polishing efficiency. The 3D model of the main drive is established by using Pro/E 3D software, and the mechanics and vibration of the driving gear are analyzed by ANSYS software. And the formation diagram of order 7-12, equivalent stress and strain diagram are obtained. The results show that the vibration frequency of the driving gear is much higher than the frequency of the vibration source, and the resonance will not occur, and the strength of the gear is sufficient. It provides theoretical guidance for the development of high efficiency saw blade polishing machine. The practice shows that the high efficiency saw blade polishing machine developed on this basis runs well and improves the production efficiency of enterprises.