Over the past century, the demand for petroleum products has increased rapidly, leading to higher oil extraction, processing and transportation, which result in numerous oil spills in coastal-marine environments. As the spilled oil can negatively affect the coastal-marine ecosystems, its transport and fates captured a significant interest of the scientific community and regulatory agencies. Typically, the environment has natural mechanisms (e.g., photooxidation, biodegradation, evaporation) to weather/degrade and remove the spilled oil from the environment. Among various oil weathering mechanisms, biodegradation by naturally occurring bacterial populations removes a majority of spilled oil, thus the focus on bioremediation has increased significantly. Helping in the marginal recognition of this promising technique for oil-spill degradation, this paper reviews recently published articles that will help broaden the understanding of the factors affecting biodegradation of spilled oil in coastal-marine environments. The goal of this review is to examine the effects of various environmental variables that contribute to oil degradation in the coastal-marine environments, as well as the factors that influence these processes. Physico-chemical parameters such as temperature, oxygen level, pressure, shoreline energy, salinity, and pH are taken into account. In general, increase in temperature, exposure to sunlight (photooxidation), dissolved oxygen (DO), nutrients (nitrogen, phosphorous and potassium), shoreline energy (physical advection—waves) and diverse hydrocarbon-degrading microorganisms consortium were found to increase spilled oil degradation in marine environments. In contrast, higher initial oil concentration and seawater pressure can lower oil degradation rates. There is limited information on the influences of seawater pH and salinity on oil degradation, thus warranting additional research. This comprehensive review can be used as a guide for bioremediation modeling and mitigating future oil spill pollution in the marine environment by utilizing the bacteria adapted to certain conditions.

Mesoplastics are emerging environmental pollutants that can pose a threat to the environment. Researching mesoplastics is crucial as they bridge the gap between macroplastics and microplastics by determining their role in plastic fragmentation and pathways, as well as their ecological impact. Investigating mesoplastic sources will help develop targeted policies and mitigation strategies to address plastic pollution. These pollutants are found across aquatic, terrestrial, and agricultural ecosystems. Unlike microplastics, mesoplastics are reviewed in the scientific literature. This paper focuses on existing published research on mesoplastics, determining the trends and synthesizing key findings related to mesoplastic pollution. Research primarily focused on marine and freshwater ecosystems, with surface water and beach sediments being the most studied compartments. Mesoplastics research often offers baseline data, with increased publications from 2014 to 2024, particularly in East Asia. However, certain ecosystems and regions remain underrepresented. Also, mesoplastics can disrupt ecosystems by degrading biodiversity, contaminating soils and waters, and affecting food chains. Mesoplastics can also become vectors for additives and pathogenic microorganisms, highlighting their environmental risks. Various factors influence mesoplastics’ prevalence, including anthropogenic and non-anthropogenic activities. With this, future research should expand into less-studied ecosystems and regions, explore mesoplastic interactions with pollutants and organisms, and promote public awareness, education, and policy measures to reduce plastic use and mitigate pollution globally.

Pteris vittata is an arsenic (As) hyperaccumulator plant that accumulates a large amount of As into fronds and rhizomes (around 16,000 mg/kg in both after 16 weeks hydroponic cultivation with 30 mg/L arsenate). However, the sequence of long-distance transport of As in this hyperaccumulator plant is unclear. In this study, we used a positron-emitting tracer imaging system (PETIS) for the first time to obtain noninvasive serial images of As behavior in living plants with positron-emitting ⁷⁴As-labeled tracer. We found that As kept accumulating in rhizomes as in fronds of P. vittata, whereas As was retained in roots of a non-accumulator plant Arabidopsis thaliana. Autoradiograph results of As distribution in P. vittata showed that with low As exposure, As was predominantly accumulated in young fronds and the midrib and rachis of mature fronds. Under high As exposure, As accumulation shifted from young fronds to mature fronds, especially in the margin of pinna, which resulted in necrotic symptoms, turning the marginal color to gray and then brown. Our results indicated that the function of rhizomes in P. vittata was As accumulation and the regulation of As translocation to the mature fronds to protect the young fronds under high As exposure.

Biodegradation is found to be a promising, cost-effective and eco-friendly option for the treatment of industrial wastewater contaminated by 1,4-dioxane (1,4-D), a highly stable synthetic chemical and probable human carcinogen. This study aimed to isolate, identify, and characterize metabolic 1,4-D-degrading bacteria from a stable 1,4-D-degrading microbial consortium. Three bacterial strains (designated as strains TS28, TS32, and TS43) capable of degrading 1,4-D as a sole carbon and energy source were isolated and identified as Gram-positive Pseudonocardia sp. (TS28) and Gram-negative Dokdonella sp. (TS32) and Afipia sp. (TS43). This study, for the first time, confirmed that the genus Dokdonella is involved in the biodegradation of 1,4-D. The results reveal that all of the isolated strains possess inducible 1,4-D-degrading enzymes and also confirm the presence of a gene encoding tetrahydrofuran/dioxane monooxygenase (thmA/dxmA) belonging to group 5 soluble di-iron monooxygenases (SDIMOs) in both genomic and plasmid DNA of each of the strains, which is possibly responsible for the initial oxidation of 1,4-D. Moreover, the isolated strains showed a broad substrate range and are capable of degrading 1,4-D in the presence of additional substrates, including easy-to-degrade compounds, 1,4-D biodegradation intermediates, structural analogs, and co-contaminants of 1,4-D. This indicates the potential of the isolated strains, especially strain TS32, in removing 1,4-D from contaminated industrial wastewater containing additional organic load. Additionally, the results will help to improve our understanding of how multiple 1,4-D-degraders stably co-exist and interact in the consortium, relying on a single carbon source (1,4-D) in order to develop an efficient biological 1,4-D treatment system.

Biodegradation of 1,4-dioxane, a water contaminant of emerging concern, has drawn substantial attention over the last two decades. A number of dioxane-degraders have been identified, though many of them are unable to metabolically utilize 1,4-dioxane. Moreover, it is considered more preferable to use microbial consortia rather than the pure strains, especially in conventional bioreactors for industrial wastewater treatment. In the present study, a stable 1,4-dioxane-degrading microbial consortium was enriched, namely 112, from industrial wastewater by nitrate mineral salt medium (NMSM). The consortium 112 is capable of utilizing 1,4-dioxane as a sole carbon and energy source, and can completely degrade 1,4-dioxane up to 100 mg/L. From the consortium 112, two 1,4-dioxane-degrading bacterial strains were isolated and identified, in which the Variovorax sp. TS13 was found to be a novel 1,4-dioxane-degrader that can utilize 100 mg/L of 1,4-dioxane. The efficacy of the consortium 112 was increased significantly when we cultured the consortium with mineral salt medium (MSM). The new consortium, N112, could utilize 1,4-dioxane at a rate of 1.67 mg/L·h. The results of the ribosomal RNA intergenic spacer analysis (RISA) depicted that changes in the microbial community structure of consortium 112 was the reason behind the improved degradation efficiency of consortium N112, which was exhibited as a stable and effective microbial consortium with a high potential for bioremediation of the dioxane-impacted sites and contaminated industrial wastewater.

PET bottle waste is easy to recycle because it is easy to separate, abundant, and competitively priced. Technologies for the treatment of PET bottle waste have been evaluated to date by using life cycle assessment (LCA), but this does not take into account all of the aspects that policymakers consider necessary when selecting an acceptable technology. Aspects such as society, economics, policies, and technical applicability need to be considered along with the environment and resource consumption to complement the LCA results for PET bottle waste. These aspects were selected as criteria for the analytical hierarchy process (AHP), and stakeholders were invited to make a comparison evaluation of the criteria and sub-criteria. Academics were involved to compare the technology options. The results show that society is the highest priority because it is the main actor that ensures the application of the technology, and that job creation is the most important indicator for the selection of the technology in society criteria. After comparing open landfills, sanitary landfills, incineration with energy recovery, pelletizing, glycolysis, and hydrolysis for the utilization of PET bottle waste, this study suggests pelletizing as the acceptable technology for Indonesia because pelletizing is dominant in all the criteria and sub-criteria which support sustainability in waste management. This is the first time that a single plastic fraction that is easy to collect and recycle has been studied with the AHP. The results show that this type of plastic could also be reused in developing countries through mechanical recycling.