This article evokes the futuristic visions of two giants, one a writer, Jules Verne, who foresaw water as the coal of the future, and the other a scientist, Giacomo Ciamician, who foresaw the utilization of solar energy as an energy source with which to drive photochemical and photocatalytic reactions for the betterment of mankind. Specifically, we examine briefly the early work of the 1960s and 1970s on the photosplitting of free water and water adsorbed on solid supports, based mostly on metal oxides, from which both hydrogen and oxygen evolve in the expected stoichiometric ratio of 2 to 1. The two oil crises of the 1970s (1973 and 1979) spurred the interest of researchers from various disciplines (photochemistry, photo-catalysis and photoelectrochemistry) in search of a Holy Grail photocatalyst, process, or strategy to achieve efficient water splitting so as to provide an energy source alternative to fossil fuels. Some approaches to the photosplitting of water adsorbed on solid insulators (high bandgap materials; Ebg ≥ 5 eV) and semiconductor photocatalysts (metal oxides) are described from which we deduce that metal oxides with bandgap energies around 5 eV (e.g., ZrO2) are more promising materials to achieve significant water splitting on the basis of quantum yields than narrower bandgap photocatalysts (e.g., TiO2; Ebg ≈ 3.0–3.2 eV), which tend to be relatively inactive by comparison. Although proof of concept of the photosplitting of water has been demonstrated repeatedly in the last four decades, much remains to be done to find the Holy Grail photocatalyst and/or strategy to achieve significant yields of hydrogen.
In this article, we report the results of comparative studies of photoelectrochemical behavior of the binary CdS/TiO2 and WO3/TiO2 and ternary CdS/WO3/TiO2 heterostructures based on titania nanotube and planar structures. Physical–chemical characterization by XRD, XPS, and electron microscopy methods together with electrochemical impedance spectroscopy measurements confirm a successful formation of heterostructured electrodes, both nanotube-based and planar. The results of photoelectrochemical studies of the heterostructures demonstrate a significant difference in their behavior depending on the structure geometry and the character of the formed heterojunctions. It is concluded that nanotube-based heterostructure electrodes can be characterized by a stochastic set of different heterojunctions while planar systems demonstrate well-ordered heterojunctions with a strictly defined electron transfer direction. Particularly, we demonstrate the possibility of the realization of Z-scheme of photoexcitation and charge separation in ternary planar systems under visible light irradiation.
We consider an approach to mathematical modeling of photodegradation of polymer nanocomposites with photoactive additives using the Monte Carlo methods. We principally pay attention to the strength decrease of these materials under solar light action. We propose a new term, “photocatalytic fatigue”, which we apply to the particular case when the mechanical strength decreases only owing to the presence of photocatalytically active components in polymeric nanocomposite material. The propriety of the term is based on a relative similarity of photostimulated mechanical destructive processes in nanocomposites with photoactive additives and mechanical destructive processes typical for metal high-cycle fatigue. Formation of the stress concentrations is one of the major causes of fatigue cracks generation in metals. Photocatalytic active nanoparticles of semiconductors initiate a generation of the stress concentrations under sunlight irradiation. The proposed mathematical model is a Wöhler curve analog for the metal high-cycle fatigue. We assume that equations for high-cycle fatigue curves of samples with stress concentrations could be used in mathematical modeling of polymer nanocomposites photodegradation. In this way, we replace the number of loading cycles with the exposition time in the equations. In the case of polypropylene and polyester samples with photoactive titanium dioxide, the experimental parameters of phenomenological equations for “photocatalytic fatigue” are calculated using one of the Monte Carlo methods based on the random search algorithm. The calculating scheme includes a solution of the extreme task of finding of the minimum of nonnegative transcendent multivariable function, which is a relative average quadratic deviation of calculated values of polymeric nanocomposite stress in comparison with corresponding experimental values. The applicability of the “photocatalytic fatigue” model for polymer nanocomposites with photoactive nanoparticles is confirmed by the example of polypropylene and polyester samples. The approximation error of the experimental strength values for them did not exceed 2%.