The continuous development of motors with high speed and high power density has significantly increased the demand for high-speed reducers. Traction drive has emerged as a new option for high-speed reducers due to its high transmission efficiency and accuracy in high-speed transmission. In the previous theoretical studies on traction drive, the traction coefficient was set as a fixed value, and the influence of elastohydrodynamic lubrication (EHL) on the traction coefficient was ignored. Therefore, this paper investigated the wedge-loading planetary traction drive (WL-PTD) and established a theoretical model combining the macroscopic and microscopic traction mechanisms of the traction drive based on Hertzian contact and mixed elastohydrodynamic lubrication (mixed EHL). The loading principle and transmission performance of WL-PTD were studied through numerical computations, and the effects of different design parameters on transmission performance were discussed. When the input speed of WL-PTD was 10,000 rpm, the peak value of the global sliding coefficient was approximately 1.27×10−5, and the maximum transmission efficiency reached 97.41%, indicating an excellent transmission performance of the WL-PTD. The findings of this study can provide theoretical guidance for subsequent optimization design.
15 February 2020 in Strojniški vestnik - Journal of Mechanical Engineering
With the global trend of electrification and the development of high-speed motor technology, the demand for high-speed reducers has been greatly promoted. As we all know, traction drive has certain inherent advantages in high-speed transmission. Therefore, this paper takes an asymmetric loading multi-roller planetary traction drive reducer as the research object. First, the kinematics and mechanics of the reducer are analyzed theoretically. Secondly, an equivalent simulation model is established according to its unique loading principle. In addition, the kinematic characteristics of the mechanism and the contact forces of its key components are obtained through mechanical simulation. The results show that the maximum relative error between the kinematic simulation value and the theoretical value of the reducer is 0.14%, the mean absolute percentage error (MAPE) of each contact force simulation value and the theoretical value is less than 5%, which verifies the effectiveness of the loading mechanism and the correctness of the theoretical analysis. Finally, the reducer transmission test rig was designed and built, and the advantages of precision transmission were verified by testing its actual speed ratio and repeated positioning accuracy.