In this article, the effect of diethylaluminum chloride (DEAC) in propylene polymerization with MgCl₂-supported Ziegler-Natta catalyst was studied. Addition of DEAC in the catalyst system caused evident change in catalytic activity and polymer chain structure. The activity decrease in raising DEAC/Ti molar ratio from 0 to 2 is a result of depressed production of isotactic polypropylene chains. The number of active centers in fractions of each polymer sample was determined by quenching the polymerization with 2-thiophenecarbonyl chloride and fractionating the polymer into isotactic, mediumisotactic and atactic fractions. The number of active centers in isotactic fraction ([C_i*]/[Ti]) was lowered by increasing DEAC/Ti molar ratio to 2, but further increasing the DEAC/Ti molar ratio to 20 caused marked increase of [C_i*]/[Ti]. The number of active centers that produce atactic and medium-isotactic PP chains was less influenced by DEAC in the range of DEAC/Ti = 0–10, but increased when the DEAC/Ti molar ratio was further raised to 20. The propagation rate constant of C_i* (k _pi) was evidently increased when DEAC/Ti molar ratio was raised from 0 to 5, but further increase in DEAC/Ti ratio caused gradual decrease in k _pi. The complicated effect of DEAC on the polymerization kinetics, catalysis behaviors and polymer structure can be reasonably explained by adsorption of DEAC on the central metal of the active centers or on Mg atoms adjacent to the central metal.

In this paper, γ-valerolactone (GVL), a bio-based polar solvent, was applied as green solvent for iron(III)-catalyzed AGET ATRP without any external ligand. GVL is a fully degradable, non-toxic green solvent and has complex ability to iron halide complexes through –OCO- group. GVL as the solvent and the ligand for AGET ATRP of MMA in a controlled manner, as proved by kinetic study, the low PDI values and the increase in polymer molecular weight versus monomer conversion. Chain re-initiation experiments and ¹HNMR characterization were conducted to further confirm the living feature.

The use of ethyl lactate solvent in the activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) of methyl acrylate is demonstrated. The solvent has good solubility for both polymers and monomers and is cheap and relatively nontoxic. The effects of reducing agent type on the polymerization were investigated. Polymerization kinetics demonstrated that the polymerization was a controlled/“living” process with predictable molecular weights and relatively narrow polydispersities. The “livingness” of the PMA macroinitiators prepared by this catalytic system was further confirmed by chain-end characterization and successful re-initiation experiments. The data presented here prove that ethyl lactate is an excellent green substitute to avoid the use of toxic solvents for Cu(II)-mediated ATRP of methyl acrylate.