Zhenwei Yan

Dr. Zhenwei Yan


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 January 2021 in Metals
Verified
Journal Article
Open access
PDF file
XYXianjie Yuan
Xianjie Yuan
Xuanhui QuXuanhui Qu
Xuanhui Qu
HYHaiqing Yin
Haiqing Yin
ZFZaiqiang Feng
Zaiqiang Feng
MTMingqi Tang
Mingqi Tang
ZTZhaojun Tan
Zhaojun Tan
This present work investigates the effects of sintering temperature on densification, mechanical properties and microstructure of Al-based alloy pressed by high-velocity compaction. The green samples were heated under the flow of high pure (99.99 wt%) N2. The heating rate was 4 °C/min before 315 °C. For reducing the residual stress, the samples were isothermally held for one h. Then, the specimens were respectively heated at the rate of 10 °C/min to the temperature between 540 °C and 700 °C, held for one h, and then furnace-cooled to the room temperature. Results indicate that when the sintered temperature was 640 °C, both the sintered density and mechanical properties was optimum. Differential Scanning Calorimetry, X-ray diffraction of sintered samples, Scanning Electron Microscopy, Energy Dispersive Spectroscopy, and Transmission Electron Microscope were used to analyse the microstructure and phases.

3 April 2024 in Materials
Verified
Journal Article
Open access
PDF file
ZYZhenwei Yan
Zhenwei Yan
SGShuaihui Guo
Shuaihui Guo
ZTZhaojun Tan
Zhaojun Tan
LWLijun Wang
Lijun Wang
GLGang Li
Gang Li
BCBin Cao
Bin Cao
Water splitting is an important way to obtain hydrogen applied in clean energy, which mainly consists of two half-reactions: hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). However, the kinetics of the OER of water splitting, which occurs at the anode, is slow and inefficient, especially in acid. Currently, the main OER catalysts are still based on noble metals, such as Ir and Ru, which are the main active components. Hence, the exploration of new OER catalysts with low cost, high activity, and stability has become a key issue in the research of electrolytic water hydrogen production technology. In this paper, the reaction mechanism of OER in acid was discussed and summarized, and the main methods to improve the activity and stability of non-noble metal OER catalysts were summarized and categorized. Finally, the future prospects of OER catalysts in acid were made to provide a little reference idea for the development of advanced OER catalysts in acid in the future.

3 July 2019 in Surface Engineering
Verified
Journal Article
Closed access
MTMingqi Tang
Mingqi Tang
ZFZaiqiang Feng
Zaiqiang Feng
XWXiangyang Wu
Xiangyang Wu
WWWen Wang
Wen Wang
GLGang Li
Gang Li
RZRuizhu Zhang
Ruizhu Zhang
Microarc oxidation (MAO) coatings were formed on AZ91D magnesium alloy in zirconate–phosphate electrolytes with and without the addition of titanium carbide (TiC) and niobium carbide (NbC) particles. Surface morphologies, structures, compositions and corrosion resistance of the MAO coatings were investigated. The MAO coating formed in the based electrolyte was mainly composed of MgO, Mg2Zr5O12 and some amorphous phases. TiC and NbC particles in the electrolyte were incorporated and uniformly distributed in the MAO coatings. Both particles increased the thickness and compactness of the MAO coatings. Electrochemical measurements results indicated that the TiC and NbC particles in the electrolyte improved the corrosion resistance of the MAO coating, and those formed in the electrolyte with NbC particles showed the best corrosion resistance.

4 October 2011 in Rare Metals
Verified
Journal Article
Closed access
PDF file
ZYZhenwei Yan
Zhenwei Yan
HMHuimin Meng
Huimin Meng

16 September 2019 in Materials
Verified
Journal Article
Open access
PDF file
XYXianjie Yuan
Xianjie Yuan
Xuanhui QuXuanhui Qu
Xuanhui Qu
HYHaiqing Yin
Haiqing Yin
ZYZhenwei Yan
Zhenwei Yan
ZTZhaojun Tan
Zhaojun Tan
In this research, the effects of the compaction velocity on the sinterability of the Al–Fe–Cr–Ti powder metallurgy (PM) alloy by high velocity compaction were investigated. The Al–Fe–Cr–Ti alloy powder was compacted with different velocities by high velocity compaction and then sintered under a flow of high pure (99.999 wt%) nitrogen gas. Results indicated that both the sintered density and mechanical properties increased with increasing compaction velocity. By increasing the compaction velocity, the shrinkage of the sintered samples decreased. A maximum sintered density of 2.85 gcm−3 (relative density is 98%) was obtained when the compaction velocity was 9.4 ms−1. The radial and axial shrinkage were controlled to less than 1% at a compaction velocity of 9.4 ms−1. At a compaction velocity of 9.4 ms−1, sintered compacts with an ultimate tensile strength of 222 MPa and a yield strength of 160 MPa were achieved. The maximum elongation was observed to be 2.6%. The enhanced tensile properties of the Al–Fe–Cr–Ti alloy were mainly due to particle boundary strengthening.

18 February 2019 in Journal of Wuhan University of Technology-Mater. Sci. Ed.
Verified
Journal Article
Closed access
PDF file
ZYZhenwei Yan
Zhenwei Yan
LSLijun Song
Lijun Song
MTMingqi Tang
Mingqi Tang
ZFZaiqiang Feng
Zaiqiang Feng