A numerical method based on optimal control theories for identifying Manning’s roughness coefficients (Manning’s n) in modeling of shallow water flows is presented. The coefficients are difficult to be determined especially when the spatial variation is significant, and are usually estimated empirically. The present methodology is applied to determine the optimal values of the spatially distributed parameters, which give least overall discrepancies between simulations and measurements. Through a series of systematic studies to identify the n values in both a hypothetical open channel and a natural stream stretch, several identification procedures based on unconstrained and constrained minimizations are analyzed. It is found that the limited-memory quasi-Newton method has the advantages of higher rate of convergence, numerical stability and computational efficiency. Although the identification of Manning’s n is chosen as an example, the identification methods can be applied to numerical simulations of various flow problems.
In this paper, a numerical method based on optimal control theories and adjoint analysis for identifying Manning's roughness coefficients in the full nonlinear de Saint Venant equations is presented. In order to make the parameter identification applicable to most natural river flows, special attention to a complex channel network is paid. The adjoint equations of the one-dimensional (1D) full nonlinear de Saint Venant equations in a channel network are obtained by means of variational approaches. To solve the adjoint equations in a channel network with confluences, the internal boundary conditions for confluences in the channel network are also derived from variational approaches and specified at the nodal points of confluences. In the present identification approach, one set of distributed parameters with spatial variation along river reaches can be identified, which insures the minimum simulation error along the whole channel network. By imposing the internal boundary conditions on confluences, the optimal estimations of the distributed roughness coefficients in unsteady channel network flows are achieved. In addition, the Limited-Memory Quasi-Newton (LMQN) method is utilized for enhancement of effectiveness of identification procedure. The bound constraints for Manning's roughness coefficients are taken into account. The constraints are capable of preserving the physical meaning of the estimated parameters throughout the identification process. This identification approach can be applied to estimate the spatial distribution of Manning's roughness coefficients in natural channel network flows.
1 August 2015 in Journal of Hydrologic Engineering
This paper presents a physics-based two-dimensional (2D) numerical model to simulate overland flows typically generated by rainfall of a storm event or multiple events in natural terrain with complex topography, landform, soil characteristics, and land use. The model is based on the 2D fully nonlinear shallow-water equations (SWEs) in which tempospatial variations of rainfall intensity and infiltration are taken into account as source and sink terms, respectively. The Green-Ampt equation is used to simulate infiltration. Due to strong nonlinearity of the coupled dynamic processes in overland flow and stormwater runoff, special efforts were made to solve this coupled-flow system under the conditions of unsteady rainfall intensity and natural terrain. To attain the modeling capabilities for multiple flow regimes including subcritical, supercritical, and the transitions, a second-order central-upwind shock-capturing scheme, which is well balanced and depth-positivity preserving, is used to solve the governing equations. The model is capable of simulating the Hortonian overland flows resulting from the complex rainfall storm events recorded by multiple rain gauges. Model verification was achieved by comparing numerical results with corresponding analytical solutions. The model was validated by reproducing the field-scale rainfall-runoff experiments conducted in Niger, West Africa, in 1994. It was further applied to simulate historical storm events in the Goodwin Creek watershed in Mississippi. Verification and validation indicate that the developed numerical model is capable of simulating hydraulic and hydrological processes in rainfall-generated overland flows over a watershed with natural terrain by considering land use and soil characteristics.
An optimal flow control methodology based on adjoint sensitivity analysis for controlling nonlinear open channel flows with complex geometries is presented. The adjoint equations, derived from the nonlinear Saint-Venant equations, are generally capable of evaluating the time-dependent sensitivities with respect to a variety of control variables under complex flow conditions and cross-section shapes. The internal boundary conditions of the adjoint equations at a confluence (junction) derived by the variational approach make the flow control model applicable to solve optimal flow control problems in a channel network over a watershed. As a result, an optimal flow control software package has been developed, in which two basic modules, i.e., a hydrodynamic module and a bound constrained optimization module using the limited-memory quasi-Newton algorithm, are integrated. The effectiveness and applicability of this integrated optimal control tool are demonstrated thoroughly by implementing flood diversion controls in rivers, from one reach with a single or multiple floodgates (with or without constraints), to a channel network with multiple floodgates. This new optimal flow control model can be generally applied to make optimal decisions in real-time flood control and water resource management in a watershed.