We examine the effect of carrier localization due to random alloy fluctuations on the radiative and Auger recombination rates in InGaN quantum wells as a function of alloy composition, crystal orientation, carrier density, and temperature. Our results show that alloy fluctuations reduce individual transition matrix elements by the separate localization of electrons and holes, but this effect is overcompensated by the additional transitions enabled by translational symmetry breaking and the resulting lack of momentum conservation. Hence, we find that localization increases both radiative and Auger recombination rates, but that Auger recombination rates increase by one order of magnitude more than radiative rates. Furthermore, we demonstrate that localization has an overall detrimental effect on the efficiency-droop and green-gap problems of InGaN light-emitting diodes.

Monolithic integration of individually addressable light-emitting diode (LED) color pixels is reported. The integration is enabled by local strain engineering. The use of a nanostructured active region comprising one or more nanopillars allows color tuning across the visible spectrum. In the current work, integration of amber, green, and blue pixels is demonstrated. The nanopillar LEDs exhibit an electrical performance comparable to that of a conventional thin-film LED fabricated on the same wafer. The proposed platform uses only standard epitaxy and a similar process flow as a conventional LED. It is also shown that the emission intensity can be linearly tuned without shifting the color coordinate of individual pixels.

Additive color mixing across the visible spectrum was demonstrated from an InGaN based light-emitting diode (LED) pixel comprising red, green, and blue subpixels monolithically integrated and enabled by local strain engineering. The device was fabricated using a top-down approach on a metal-organic chemical vapor deposition-grown sample consisting of a typical LED epitaxial stack. The three color subpixels were defined in a single lithographic step. The device was characterized for its electrical properties and emission spectra under an uncooled condition, which is desirable in practical applications. The color mixing was controlled by pulse-width modulation, and the degree of color control was also characterized.