The integrity of the containment will be challenged during a severe accident due to pressurization caused by the accumulation of steam and other gases and possible ignition of hydrogen and carbon monoxide. Installation of a passive filtered venting system and passive autocatalytic recombiners allows control of the pressure, radioactive releases, and concentration of flammable gases. Thermal hydraulic analysis of the containment equipped with dedicated passive safety systems after a hypothetical station blackout event is performed for a two-loop pressurized water reactor NPP with three integral severe accident codes: ASTEC, MELCOR, and MAAP. MELCOR and MAAP are two major US codes for severe accident analyses, and the ASTEC code is the European code, joint property of Institut de Radioprotection et de Sûreté Nucléaire (IRSN, France) and Gesellschaft für Anlagen und Reaktorsicherheit (GRS, Germany). Codes’ overall characteristics, physics models, and the analysis results are compared herein. Despite considerable differences between the codes’ modelling features, the general trends of the NPP behaviour are found to be similar, although discrepancies related to simulation of the processes in the containment cavity are also observed and discussed in the paper.

A comprehensive uncertainty analysis in the event of a severe accident in a two-loop pressurized water reactor is conducted using an uncertainty package integrated in the ASYST code. The plant model is based on the nuclear power plant (NPP) Krško, a Westinghouse-type power plant. The station blackout scenario with a small break loss of coolant accident is analyzed, and all processes of the in-vessel phase are covered. A best estimate plus uncertainty (BEPU) methodology with probabilistic propagation of input uncertainty is used. The uncertain parameters are selected based on their impact on the safety criteria, the operation of the NPP safety systems and to describe uncertainties in the initial and boundary conditions. The number of required calculations is determined by the Wilks formula from the desired percentile and confidence level, and the values of the uncertain parameters are randomly sampled according to appropriate distribution functions. Results showing the thermal hydraulic behaviour of the primary system and the propagation of core degradation are presented for 124 successful calculations, which is the minimum number of required calculations to estimate a 95/95 tolerance limit at the 3rd order of the Wilks formula application. A statistical analysis of the dispersion of results is performed afterwards. Calculation of the influence measures shows a strong correlation between the decay heat and the representative output quantities, which are the mass of hydrogen produced during the oxidation and the height of molten material in the lower head. As the decay heat increases, an increase in the production of hydrogen and the amount of molten material is clearly observed. The correlation is weak for other input uncertain parameters representing physical phenomena, initial and boundary conditions. The influence of the order of the Wilks formula is investigated and it is found that increasing the number of calculations does not significantly change the bounding values or the distribution of results for this particular application.

The point-kernel (PK) technique has a long history in applied radiation shielding, originating from the early days of digital computers. The PK technique applied to gamma-ray attenuation is one of many successful applications, based on the linear superposition principle applied to distributed radiation sources. Mathematically speaking, the distributed source will produce a detector response equivalent to the numerical integration of the radiation received from an equivalent number of point sources. In this treatment, there is no interference between individual point sources, while inherent limitations of the PK method are its inability to simulate gamma scattering in shields and the usage of simple boundary conditions. The PK method generally works for gamma-ray shielding with corrective B-factor for scattering and only specifically for fast neutron attenuation in a hydrogenous medium with the definition of cross section removal. This paper presents theoretical and programming aspects of the PK program developed for a distributed source of photons (line, disc, plane, sphere, slab volume, etc.) and slab shields. The derived flux solutions go beyond classical textbooks as they include the analytical integration of Taylor B-factor, obtaining a closed form readily suitable for programming. The specific computational modules are unified with a graphical user interface (GUI), assisting users with input/output data and visualization, developed for the fast radiological characterization of simple shielding problems. Numerical results of the selected PK test cases are presented and verified with the CADIS hybrid shielding methodology of the MAVRIC/SCALE6.1.3 code package from the ORNL.

Operation and Performance Analysis of Steam Generators in Nuclear Power Plants | InTechOpen, Published on: 2017-04-26. Authors: Siniša Šadek and Davor Grgić