A 3D imaging technique using a high speed binocular stereovision system was developed in combination with corresponding image processing algorithms for accurate determination of the parameters of particles leaving the spinning disks of centrifugal fertilizer spreaders. Validation of the stereo-matching algorithm using a virtual 3D stereovision simulator indicated an error of less than 2 pixels for 90% of the particles. The setup was validated using the cylindrical spread pattern of an experimental spreader. A 2D correlation coefficient of 90% and a Relative Error of 27% was found between the experimental results and the (simulated) spread pattern obtained with the developed setup. In combination with a ballistic flight model, the developed image acquisition and processing algorithms can enable fast determination and evaluation of the spread pattern which can be used as a tool for spreader design and precise machine calibration.
Having a system to measure food consumption is important to establish whether individual nutritional needs are being met in order to act quickly and to minimize the risk of undernutrition. Here, we tested a smartphone-based food consumption assessment system named FoodIntech. FoodIntech, which is based on AI using deep neural networks (DNN), automatically recognizes food items and dishes and calculates food leftovers using an image-based approach, i.e., it does not require human intervention to assess food consumption. This method uses one-input and one-output images by means of the detection and synchronization of a QRcode located on the meal tray. The DNN are then used to process the images and implement food detection, segmentation and recognition. Overall, 22,544 situations analyzed from 149 dishes were used to test the reliability of this method. The reliability of the AI results, based on the central intra-class correlation coefficient values, appeared to be excellent for 39% of the dishes (n = 58 dishes) and good for 19% (n = 28). The implementation of this method is an effective way to improve the recognition of dishes and it is possible, with a sufficient number of photos, to extend the capabilities of the tool to new dishes and foods.
Most of the existing fingerprint extraction techniques currently available are based on ridge structure. The ridge usually has thicker structure than the valley, so that more processing time is needed to extract the ridge than extracting the valley. Taking the advantage of the thin structure of the valley, we proposed an algorithm that reduces the time needed for minutiae extraction. The algorithm was developed in Matlab environment using fingerprint images from FVC2004. In order to show the performance of the algorithm, numerical results are presented.
Text line segmentation is a necessary preliminary step before most text transcription algorithms are applied. The leading deep learning networks used in this context (ARU-Net, dhSegment, and Doc-UFCN) are based on the U-Net architecture. They are efficient, but fall under the same concept, requiring a post-processing step to perform instance (e.g., text line) segmentation. In the present work, we test the advantages of Mask-RCNN, which is designed to perform instance segmentation directly. This work is the first to directly compare Mask-RCNN- and U-Net-based networks on text segmentation of historical documents, showing the superiority of the former over the latter. Three studies were conducted, one comparing these networks on different historical databases, another comparing Mask-RCNN with Doc-UFCN on a private historical database, and a third comparing the handwritten text recognition (HTR) performance of the tested networks. The results showed that Mask-RCNN outperformed ARU-Net, dhSegment, and Doc-UFCN using relevant line segmentation metrics, that performance evaluation should not focus on the raw masks generated by the networks, that a light mask processing is an efficient and simple solution to improve evaluation, and that Mask-RCNN leads to better HTR performance.
20 June 2002 in Measurement Science and Technology
This paper describes the design of a high resolution low cost imaging system for the analysis of high speed particle projection. This system, based on a camera and a set of flashes, is used to characterize the centrifugal spreading of fertilizer particles ejected at speeds of ≈30 m s-1. Multiexposure images collected with the camera installed perpendicular to the output flow of granules are analysed to estimate the trajectories of the fertilizer granules. Very good results are obtained with the Markov random fields method, in comparison with others.
In this paper, we introduce a methodology for designing a system for face detection and its implementation on FPGA. The chosen face detection method is the well-known convolutional face finder (CFF) algorithm, which consists in a pipeline of convolutions and subsampling operations. Our goal is to define a parallel architecture able to process efficiently this algorithm. We present a dataflow based architecture algorithm adequation (AAA) methodology implemented using the SynDEx software, in order to find the best compromise between the processing power and functionality requirement of each processor element (PE), and the efficiency of algorithm parallelization. We describe a first implementation of a PE on a Virtex 4 FPGA using the DSP48 dedicated blocks. This PE is able to run at a maximum frequency of 352 MHz and occupies only 2% of a Virtex 4 SX35 device.