The direct shear test using shear box is commonly recommended by practicing geotechnical engineers to obtain the cohesion and angle of internal friction for granular soils. The clay liners involve sand as a main constituent with added clay of variable proportions. This research aims at investigating the reliability of using the direct shear test for different clay contents and different moisture contents using an adequate shearing strain. These factors were found to affect the bilinear trends of shear force versus horizontal displacement profile as well as vertical displacement versus horizontal displacement curves. The cohesion of the mixture was found to increase consistently with the increase of clay content. Increase in moisture content was found to cause a drop in both cohesion and angle of internal friction. These changes are not independent of the density state of clay-sand mixtures. Standard compaction properties for a range of clay-sand mixtures were investigated. This work provides the general trends expected in direct shear tests for clay-sand mixtures of variable clay and moisture contents.

This research work involved surveying major road damages attributed to expansive soils with particular focus on Saudi Arabia. Roads and light structures in various parts of this country experienced damage as a result of moisture increase and environment changes to subgrade soils. Strains in asphalt pavement due to volume change in soils can lead to cracking and attract water seepage to lower formations. An attempt was made to link the road damage to the soil conditions, road geometry and road drainage arrangements. The parameters influencing the swelling process including thickness of pavement, slope of the shoulder, adjacent topography and drainage setup are discussed. Recommendations to achieve better road performance are presented. Applications of cut—off walls and dressing layers are suggested for certain conditions.

In this study, the chemical stabilization of moderately to highly plastic expansive soil using calcium chloride with added cement is introduced as an effective alternative to the conventional approaches using a single additive such as lime, cement, or a by-product of industrial processes. Using only calcium chloride may lead to its leaching or dissolution over time, leaving a collapsing skeleton with weak bonds. The chemical effect produced by additives is dependent on the constituents of the stabilized soil and the curing period considered. Herein, calcium chloride concentrations of 2%, 4%, and 8% with the addition of 2% cement by dry weight of the soil were considered. The main objective of this study is to investigate the addition of a low amount of cement as a binder to improve the strength and durability of a chemically treated expansive soil. The engineering properties were investigated at 3 curing times: 3 days, 7 days, and 28 days. A laboratory investigation was carried out to investigate the effect of the addition of calcium chloride with cement on the swell potential, swell pressure, compression index, suction, and unconfined compressive strength. Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX) testing was conducted. The X-ray diffraction patterns were recorded to observe the mineralogy of the material. The results confirmed that calcium chloride with cement is very effective for stabilizing the expansive soil. A reduction in the swell potential by 8% and 25% and a reduction in swelling pressure by 28% and 37.4% were observed for 4% and 8% calcium chloride with cement addition. The compression index decreased with the increase in the calcium chloride content.