To achieve highly efficient purification of emulsified oil, a superhydrophobic, superoleophilic and under-oil superhydrophobic poly(vinylidene fluoride) (PVDF) nanofibrous membrane was developed through a facile electrospinning strategy. The PVDF nanofibrous membrane exhibited a synchronous combination of nanofibers and micro/nanospheres, which was produced by solely controlling the PVDF concentration of the electrospun solutions. The fabricated PVDF nanofibrous membrane exhibited a water contact angle of 152° ± 2°, oil contact angle of 0° in air and under-oil–water contact angle of 152° ± 1° due to the inherently low surface energy and unique structures composed of nanofibers and micro/nanospheres. Thanks to the under-oil superhydrophobicity, hierarchical structure and high porosity (∼95%), the composite membrane showed extremely high permeability of 88 166 ± 652 L m−2 h−1 bar−1 with separation efficiency higher than 99%, which was few orders of magnitude higher than the previous findings. Moreover, the nanofibrous membrane exhibited robust continuous separation, indicating its scalable application for purifying emulsified oil.
Nowadays, the environmental problem caused by oily wastewater discharge and crude oil leakage has attracted worldwide attention. Recently developed technologies for oil/water separation have been based mainly on materials with special wettability. In this work, a self-cleaning system with smart-control and reusable functions for oil/water separation has been built on cotton fabric via surface-initiated atom transfer radical polymerization (ATRP) of 2-dimethylaminoethyl methacrylate (DMAEMA). The fabric showed high pH- and thermo-responsibility, which was strongly dependent on the pDMAEMA grafting ratio. And by modulating pH or temperature, the fabric switched from superhydrophilic (WCA ∼ 0°) to highly hydrophobic (WCA ∼ 130°), and therefore, were suitable both for the separation of water-rich or oil-rich oil/water mixtures as a type of adsorbent material. The fabric could adsorb oil over 4 times its own weight, and reversibly release it in acidic water, making the fabric easily recyclable.
We tuned the lower critical solution temperature (LCST) of amphiphilic poly(N-isopropylacrylamide) (PNIPAAm) via copolymerization with a hydrophilic comonomer of N-hydroxymethyl acrylamide (NHMAAm). A series of copolymers P(NIPAAm-co-NHMAAm) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/(N,N,N',N',N''-Pentamethyldiethylenetriamine) (PMDETA) as a catalyst system and 2-bromo ethyl isobutyrate (EBiB) as an initiator. The copolymers were well characterized by Fourier transform infrared spectroscopy (FT-IR), 1H Nuclear magnetic resonance (NMR), and Thermogravimetric analysis (TGA). The copolymers followed a simple rule in their thermosensitive behaviors and have a linear increase in the LCST as a function of NHMAAm mol%. The thermosensitive properties of the copolymer films were investigated and demonstrated hydrophilic-hydrophobic transitions. Finally, the copolymer was grafted onto cotton fabrics using citric acid (CA) as a crosslinking agent and sodium hypophosphite (SHP) as a catalyst following a two dipping, two padding process. The large number of hydroxyl groups in the copolymer makes grafting convenient and firm. The grafted cotton fabrics show obvious thermosensitive behaviors. The results demonstrate that the cotton fabrics become more hydrophobic when the temperature is higher than the LCST. This study presents a valuable route towards temperature-responsive smart textiles and their potential applications.
14 December 2019 in Environmental Chemistry Letters