Seabed surveying is the basis of engineering development in shallow waters. At present, geophysical survey methods mainly utilize sonars for qualitative surveying, which requires the calibration of the results found through in situ drilling and sampling. Among them, the parameters required for engineering designs are obtained from either in situ tests or laboratory experiments of soil samples retrieved from drilling. However, the experience from onshore applications shows that the physical quantities obtained through quantitative geophysical survey methods for shallow waters can be indirectly used to estimate engineering parameters or directly as parameters for engineering evaluation, which has high application potential. This review analyzes various geophysical survey methods for nearshore site characterization (i.e., side-scan sonar, single/multi- beam sonar, sub-bottom profiler, seismic reflection method, and underwater magnetometer) and challenges in their application, and introduces quantitative geophysical survey methods (including the underwater seismic refraction method, seismic surface wave method and underwater electrical resistivity tomography) that are worth focusing on for future development. Three application difficulties have been identified, namely, the lack of operational efficiency, appropriate operational equipment and systems, and sufficient guidance for experimental shallow sea applications. It is hoped that comprehensive discussion of these challenges will increase awareness leading to engineering improvements in the surveying and measuring capabilities in shallow waters, further reducing the risk of geotechnical hazards.
Landslides have caused extensive infrastructure damage and caused human fatalities for centuries. Intense precipitation and large earthquakes are considered to be two major landslide triggers, particularly in the case of catastrophic landslides. The most widely accepted mechanistic explanation for landslides is the effective-stress dependent shear strength reduction due to increases in pore water pressure. The Chashan landslide site, selected for the present study, has been intensively studied from geological, geophysical, geodetic, geotechnical, hydrological, and seismological perspectives. Our seismic monitoring of daily relative velocity changes (dv/v) indicated that landslide material decreases coincided with the first half of the rainy period and increased during the latter half of the rainy period. The geodetic surveys before and after the rainy period identified vertical subsidence without horizontal movement. The results from the multidisciplinary investigation enabled us to draw a conceptual model of the landslide recovery process induced by water loading. Where all sliding materials were stable (safety factor > 1.0), unconsolidated landslide colluvium and impermeable sliding surfaces trapped the seepage water to form a water tank, provided that compact forces were acting on the materials below the sliding boundary. The vertical force of compaction facilitates an increase in the cohesion and strength of landslide materials, thereby increasing the landslide materials’ stability. We demonstrated that the recovery process periodically occurs only under the combined conditions of prolonged and intense precipitation and the related stability conditions.
9 October 2009 in The Journal of Physical Chemistry C
Dispersion analysis in surface wave testing is conventionally associated with a certain method of data acquisition, such as phase angle analysis in the two-station spectral analysis of surface wave (SASW) method and two-dimensional (2D) multistation wavefield transformation in the multistation analysis of surface wave (MASW) method. A new procedure has been developed to reconstruct the SASW data as MASW-imitating data, taking advantage of the 2D multistation wavefield transformation to better analyze the SASW data. Numerical simulations and a real-world example demonstrate the feasibility of this procedure, but also reveal an unwanted side effect associated with aliasing. A common-receiver survey is proposed for future experiments to eliminate this unwanted side effect and at the same time increase the lateral resolution.