In this work, we design a small-sized bi-cone acoustic vector-sensor array (BCAVSA) and propose a frequency invariant beamforming method for the BCAVSA, inspired by the Ormia ochracea’s coupling ears and harmonic nesting. First, we design a BCAVSA using several sets of cylindrical acoustic vector-sensor arrays (AVSAs), which are used as a guide to construct the constant beamwidth beamformer. Due to the mechanical coupling system of the Ormia ochracea’s two ears, the phase and amplitude differences of acoustic signals at the bilateral tympanal membranes are magnified. To obtain a virtual BCAVSA with larger interelement distances, we then extend the coupling magnified system into the BCAVSA by deriving the expression of the coupling magnified matrix for the BCAVSA and providing the selecting method of coupled parameters for fitting the underwater signal frequency. Finally, the frequency invariant beamforming method is developed to acquire the constant beamwidth pattern in the three-dimensional plane by deriving several sets of the frequency weighted coefficients for the different cylindrical AVSAs. Simulation results show that this method achieves a narrower mainlobe width compared to the original BCAVSA. This method has lower sidelobes and a narrower mainlobe width compared to the coupling magnified bi-cone pressure sensor array.
With the development of acoustic stealth technology and underwater acoustic countermeasure technology, the detection performance of monostatic sonar system for low-noise targets is difficult to meet the operational requirements, while the comprehensive detection of multistatic system may greatly improve the detection performance, which provides a new way to solve the detection problem of a quiet target. Therefore, a fusion detection algorithm based on vector hydrophone for multistatic sonar system is proposed in this paper. The detection performance of four kinds of sonar systems is compared, which are monostatic distributed, monostatic centralized, multistatic distributed and multistatic centralized. Detection performance is quantitatively analyzed by the detection range of detection probability above the detection threshold. The research has a certain reference value for large-scale target detection.
1 March 2026 in The Journal of the Acoustical Society of America
In deep water, a near-bottom vector sensor vertical line array (VSVLA) enables three-dimensional (3-D) passive localization of submerged sources. For a shallow source, localization is typically performed in two steps: azimuth and range estimation using 2-D spatial spectrum estimation (2DSSE), and depth estimation by matching the frequency-domain interference period. However, in multitarget scenarios, the limited spatial resolution of the VSVLA can easily cause missed detections, while multiple threshold detections encounter a severe measurement-to-track association (MTA) problem. To address these challenges, this work adopts a track-before-detect (TBD) framework to avoid the explicit MTA process. The proposed algorithm jointly scans the intensity over the azimuth-range-depth grid using a pre-generated interference-matched kernel function and directly inputs it into TBD as the measurement, effectively mitigating missed detections caused by 2DSSE bright spot overlap. Building on the incorporation of multiple auxiliary particle filter as the tracker, adaptive weight filtering and Rao-Blackwellization strategies are further employed to improve convergence speed and reduce state dimensionality, respectively. The proposed algorithm demonstrates high robustness even under low signal-to-noise ratio conditions and environmental fluctuations. Its localization performance is validated through simulations across multiple complex deep-water scenarios, as well as a towed-source experiment.