Microfabrication and Exploratory Nanotechnology, Micro and Nanofabrication Department, International Iberian Nanotechnology Laboratory, Braga, Portugal
Dr. Patrícia Sousa
Microfabrication and Exploratory Nanotechnology, Micro and Nanofabrication Department, International Iberian Nanotechnology Laboratory, Braga, Portugal
In this study, we show the importance of extensional rheology, in addition to the shear rheology, in the choice of blood analog solutions intended to be used in vitro for mimicking the microcirculatory system. For this purpose, we compare the flow of a Newtonian fluid and two well-established viscoelastic blood analog polymer solutions through microfluidic channels containing both hyperbolic and abrupt contractions/expansions. The hyperbolic shape was selected in order to impose a nearly constant strain rate at the centerline of the microchannels and achieve a quasihomogeneous and strong extensional flow often found in features of the human microcirculatory system such as stenoses. The two blood analog fluids used are aqueous solutions of a polyacrylamide (125 ppm w/w) and of a xanthan gum (500 ppm w/w), which were characterized rheologically in steady-shear flow using a rotational rheometer and in extension using a capillary breakup extensional rheometer (CaBER). Both blood analogs exhibit a shear-thinning behavior similar to that of whole human blood, but their relaxation times, obtained from CaBER experiments, are substantially different (by one order of magnitude). Visualizations of the flow patterns using streak photography, measurements of the velocity field using microparticle image velocimetry, and pressure-drop measurements were carried out experimentally for a wide range of flow rates. The experimental results were also compared with the numerical simulations of the flow of a Newtonian fluid and a generalized Newtonian fluid with shear-thinning behavior. Our results show that the flow patterns of the two blood analog solutions are considerably different, despite their similar shear rheology. Furthermore, we demonstrate that the elastic properties of the fluid have a major impact on the flow characteristics, with the polyacrylamide solution exhibiting a much stronger elastic character. As such, these properties must be taken into account in the choice or development of analog fluids that are adequate to replicate blood behavior at the microscale.
We investigate the stability of steady planar stagnation flows of a dilute polyethylene oxide (PEO) solution using T-shaped microchannels. The precise flow rate control and well-defined geometries achievable with microfluidic fabrication technologies enable us to make detailed observations of the onset of elastically driven flow asymmetries in steady flows with strong planar elongational characteristics. We consider two different stagnation flow geometries; corresponding to T-shaped microchannels with, and without, a recirculating cavity region. In the former case, the stagnation point is located on a free streamline, whereas in the absence of a recirculating cavity the stagnation point at the separating streamline is pinned at the confining wall of the microchannel. The kinematic differences in these two configurations affect the resulting polymeric stress fields and control the critical conditions and spatiotemporal dynamics of the resulting viscoelastic flow instability. In the free stagnation point flow, a strand of highly oriented polymeric material is formed in the region of strong planar extensional flow. This leads to a symmetry-breaking bifurcation at moderate Weissenberg numbers followed by the onset of three-dimensional flow at high Weissenberg numbers, which can be visualized using streak-imaging and microparticle image velocimetry. When the stagnation point is pinned at the wall this symmetry-breaking transition is suppressed and the flow transitions directly to a three-dimensional time-dependent flow at an intermediate flow rate. The spatial characteristics of these purely elastic flow transitions are compared quantitatively to the predictions of two-dimensional viscoelastic numerical simulations using a single-mode simplified Phan-Thien–Tanner (SPTT) model.Swiss National Science Foundation (Grant PBEZ2- 115179)Fundação para a Ciência e a Tecnologia (FCT) (Grant PTDC/EQU-FTT/71800/2006)Fundação para a Ciência e a Tecnologia (FCT) (Grant PTDC/EQU-FTT/70727/2006
1 November 2014 in Experimental Thermal and Fluid Science
The characterization of the extensional rheology of polymeric solutions is important in several applications and industrial processes. Filament stretching and capillary breakup rheometers have been developed to characterize the extensional properties of polymeric solutions, mostly for high-viscosity fluids. However, for low concentration polymer solutions, the measurements are difficult using available devices, in terms of the minimum viscosity and relaxation times that can be measured accurately. In addition, when the slow retraction method is used, solvent evaporation can affect the measurements for volatile solvents. In this work, a new setup was tested for filament breakup experiments using the slow retraction method, high-speed imaging techniques, and an immiscible oil bath to reduce solvent evaporation and facilitate particle tracking in the thinning filament. Extensional relaxation times above around 100 μs were measured with the device for dilute and semi-dilute polymer solutions. Particle tracking velocimetry was also used to measure the velocity in the filament and the corresponding elongation rate, and to compare with the values obtained from the measured exponential decay of the filament diameter.
1 June 2010 in Journal of Non-Newtonian Fluid Mechanics