The growth of undersea exploration is pushing both the length and the complexity of propeller-driven autonomous underwater vehicles (AUVs) missions, leading to more stringent energy requirements. One approach to decrease the energy consumption of a hovering capable AUV is to use variable buoyancy systems (VBS) as a complement to the propeller actuators. These devices only require energy consumption during limited periods of time, taking into advantage the fact that whenever buoyancy is different from zero, the vehicle will continuously ascend or descend. Nevertheless, literature is scarce regarding the choice of the type of the VBS and of its constitutive elements, and regarding their effects on the energy required for buoyancy changes. This work presents structured and detailed static models of electromechanical and electrohydraulic VBSs that allow the calculation of the power required to actuate them. Based on the VBS desired characteristics and on manufacturer's data, the power consumption in each element of the VBS can be pinpointed to determine critical elements. Furthermore, a direct energy comparison with propeller-based solutions can be performed, allowing an easy evaluation of the energy gains provided by the VBS in different scenarios. This work also presents the preliminary development of an electromechanical and electrohydraulic VBS for an existing AUV at the University of Porto, Porto, Portugal. Based on the developed VBS and the developed model, numerical examples are provided for typical mission profiles. It is shown that the use of a VBS in the case of the existing AUV at the University of Porto leads to considerable energetic improvements.
Underwater long-endurance platforms are crucial for continuous oceanic observation, allowing for sustained data collection from a multitude of sensors deployed across diverse underwater environments. They extend mission durations, reduce maintenance needs, and significantly improve the efficiency and cost-effectiveness of oceanographic research endeavors. This paper investigates the closed-loop depth control of actuation systems employed in underwater vehicles, focusing on the energy consumption of two different mechanisms: variable buoyancy and propeller actuated devices. Using a prototype previously developed by the authors, this paper presents a detailed model of the vehicle using both actuation solutions. The proposed model, although being a linear-based one, accounts for several nonlinearities that are present such as saturations, sensor quantization, and the actuator brake model. Also, it allows a simple estimation of the energy consumption of both actuation solutions. Based on the developed models, this study then explores the intricate interplay between energy consumption and control accuracy. To this end, several PID-based controllers are developed and tested in simulation. These controllers are used to evaluate the dynamic response and power requirements of variable buoyancy systems and propeller actuated devices under various operational conditions. Our findings contribute to the optimization of closed-loop depth control strategies, offering insights into the trade-offs between energy efficiency and system effectiveness in diverse underwater applications.
Pneumatic linear peristaltic actuators can offer some potential advantages when compared with conventional ones. The low cost, virtually unlimited stroke and easy implementation of curved motion profiles are among those benefits. On the downside, these actuators suffer high mechanical stress that can lead to short service life and increased leakage among chambers during the actuator lifetime. One way to cope with this problem is to impose the force—instead of the displacement—between rollers, as this has been shown to improve the endurance of the hose while reducing leakage during the actuator lifetime. This paper presents closed control loop results using such a setup. Previous studies with linear peristaltic actuators have revealed that, although it is possible to reach zero steady state error to constant references with closed loop control, the dynamic response obtained is very slow. This paper is mainly focused on this topic, namely on the development of several control laws to improve the dynamic performance of the system while avoiding limit cycles. The new developed control law leads to an average time of 1.67 s to reach a 0.1 mm error band in an experiment consisting of a series of 16 steps ranging from 0.02 to 0.32 m in amplitude.
There are several compelling reasons for exploring the ocean, for instance, the potential for accessing valuable resources, such as energy and minerals; establishing sovereignty; and addressing environmental issues. As a result, the scientific community has increasingly focused on the use of autonomous underwater vehicles (AUVs) for ocean exploration. Recent research has demonstrated that buoyancy change modules can greatly enhance the energy efficiency of these vehicles. However, the literature is scarce regarding the dynamic models of the vertical motion of buoyancy change modules. It is therefore difficult to develop adequate depth controllers, as this is a very complex task to perform in situ. The focus of this paper is to develop simplified linear models for a buoyancy change module that was previously designed by the authors. These models are experimentally identified and used to fine-tune depth controllers. Experimental results demonstrate that the controllers perform well, achieving a virtual zero steady-state error with satisfactory dynamic characteristics.
Ocean exploration is of major importance for several reasons, including energy and mineral resource retrieval, sovereignty, and environmental concerns. The use of autonomous underwater vehicles (AUV) has thus been receiving increased attention from the scientific community. In this context, it has been shown that the use of buoyancy change modules (BCMs) can significantly improve the energy efficiency of an AUV. However, the literature regarding the detailed design of these modules is scarce. This paper contributes to this field by describing the development of an electromechanical buoyancy change module prototype to be incorporated into an existing AUV. A detailed description of the constraints and compromises existing in the design of the device components is presented. In addition, the mechanical design of the hull based on FEM simulations is described in detail. The prototype is experimentally tested in a shallow pool where its full functionality is shown. The paper also presents preliminary experimental values of the power consumption of the device and compares them with the ones provided by existing models in the literature.
13 October 2018 in The International Journal of Advanced Manufacturing Technology