This paper introduces an assessment of the representation of shape parameter measurements on theoretical particles. The aim of the study was to establish a numerical method for estimating sphericity, roundness, and roughness on artificially designed particles and to evaluate their interdependence. The parameters studied included a fractal dimension (FD), solidity (So), Wadell’s roundness (Rw), a perimeter-area normalized ratio (¥), and sphericity (S). The methods of the work included: (a) the design of theoretical particles with different shapes, (b) the definition of optimal analysis conditions for automated measurements, (c) the quantification of particle parameters by computer vision-based image processing, and (d) the evaluation of interdependence between the parameters. The study established the minimum sizes required for analysis of the particle shape. These varied depending on the method used (150 pixels or 50 pixels). Evaluating the relationships between the parameters showed that FD and So are independent of S. Nevertheless, Rw and ¥ are clearly dependent on S and, thus, must be numerically corrected to Rwc and ¥c. FD, So, Rwc, and ¥c were used to establish, mathematically, a new regularity parameter (RBC) that reflects the degree of roundness of a particle. The process was applied to a case study and the evaluation of all parameters corroborated previous petrographic characterizations.
Optical image analysis (OIA) supporting microscopic observation can be applied to improve ore mineral characterization of ore deposits, providing accurate and representative numerical support to petrographic studies, on the polished section scale. In this paper, we present an experimental application of an automated mineral quantification process on polished sections from Zaruma-Portovelo intermediate sulfidation epithermal deposit (Ecuador) using multispectral and color images. Minerals under study were gold, sphalerite, chalcopyrite, galena, pyrite, pyrrhotite, bornite, hematite, chalcocite, pentlandite, covellite, tetrahedrite and native bismuth. The aim of the study was to quantify the ore minerals visible in polished section through OIA and, mainly, to show a detailed description of the methodology implemented. Automated ore identification and determination of geometric parameters predictive of geometallurgical behavior, such as grade, grain size or liberation, have been successfully performed. The results show that automated identification and quantification of ore mineral images are possible through multispectral and color image analysis. Therefore, the optical image analysis method could be a consistent automated mineralogical alternative to carry on detailed ore petrography.