Nodular iron brake discs typically fail due to serious thermal fatigue cracking, and the presence of graphite complicates the repair of crack defects in ductile iron. This study presents a novel method for remanufacturing ductile iron brake discs based on coupled bionics to repair thermal fatigue cracks discontinuously using bio-inspired crack blocking units fabricated by laser remelting at various laser energy inputs. Then, the ultimate tensile force and thermal fatigue crack resistance of the obtained units were tested. The microhardness, microstructure, and phases of the units were characterized using a digital microhardness meter, optical microscopy, scanning electron microscopy, and X-ray diffraction. It was found that the units without defects positively impacted both the thermal fatigue resistance and tensile strength. The unit fabricated at a laser energy of J/ had sufficient depth to fully close the crack, and exhibited superior anti-cracking and tensile properties. When the unit distance is 3 mm, the sample has excellent thermal fatigue resistance. In addition, the anti-crack mechanism of the units was analysed.
The coupling bionic surface is generally prepared by laser melting on the surface of a gray iron brake hub, which can allow the brake hub to achieve excellent wear resistance and fatigue resistance. The designs of most previous experiments have been based on independent units that were uniform in their distribution patterns. Although some progress has been made in the optimization of cell features, there is still room for further improvement with respect to bionics and experimental optimization methods. Here, experiments on units with non-uniform distributions of different distances were used to rearrange and combine the bionic elements. This paper is that the original uniform distribution laser melting strengthening model was designed as a non-uniform distribution model, and the heat preservation and tempering strengthening effect of continuous multiple melting strengthening on the microstructure of the melting zone is discussed. The mechanism of crack initiation and the mode of crack propagation were analyzed. The relationship between the internal stress in the melting zone and the crack initiation resistance was also discussed. In this paper, the mechanism of different spacing distribution on the surface of gray cast iron by laser remelting is put forward innovatively and verified by experiments, which provides a solid theoretical basis for the follow-up industrial application.
When the surface of gray cast iron is subjected to laser irradiation and melted and then re-solidified, a material can be obtained that has a superior structure and properties to the base metal. On the surface of gray iron brake drums, the surface of the raw material can be processed into a bionic coupling surface with different shapes, structures, and soft and hard tissues similar to the surface of an organism. The wear resistance and fatigue resistance of brake drum surfaces can be greatly improved. However, the relative wear characteristics of the friction pairs in brake systems show that performance improvements in brake systems are the result of appropriately matching the brake drum and brake pad. This paper studies the wear relationship between three kinds of commonly-used brake pads (semi-metallic, organic asbestos-free, and ceramic) and different biomimetic models of brake drum samples. The interaction mechanism and failure mode between three kinds of brake pads and bionic samples were determined. According to the wear test results, the matching relationship between the brake pads and the brake drum was analyzed and determined, which provides a basis for the application of bionic brake drums.