Given the field of application and the many advantages, the use of FGM (Functionally Graded Materials) materials has recently been extended in several components and more particularly in cylindrical structures, which have been the subject of several recent studies. Our work aims to use the finite element method to analyze a cylindrical structure in FGM with properties gradated in the direction of the radius (Thickness) solicited purely in internal pressure by the implementation of a UMAT subroutine in the calculation code ABAQUS. The elasto-plastic behavior of the FGM is described by the flow theory represented by the equivalent stress of Von Mises and an incremental hardening variable. The TTO model (Tamura-Tomota-Ozawa) was used only to determine the elastic-plastic properties of the FGM material. The radial, tangential and axial stresses according to the thickness were evaluated in the first part of our work. In the second part, these stresses are evaluated under the same conditions but with the presence of a micro-cavity. The results obtained show clearly that these stresses are in direct relation not only with the thickness and properties of the FGM tube but also with the presence of the cavity.
4 February 2019 in Periodica Polytechnica Mechanical Engineering
This study has been made to determine the performance of the (Ti-TiB) FGM plate to reduce the J-integral calculated for the crack tip emanating from the semicircular notch root in mode I and mixed mode, when the crack is propagated from the notch root. In this paper, 3D finite element method is applied to analyze the behavior of a crack emanating from semicircular notch root growing from the metal (Ti) and is oriented perpendicularly in direction of ceramic (TiB). The J-integral has been found for several combinations laws of FGM plates with respect to the variable combination of the crack length, the plate thickness, the notch radius, Young modulus of FGM plate constituents and the crack orientation. These parameters must be optimized in order to improve the best performances.
The paper addresses the multi-body modelling of an electric wheelchair using Jourdain’s principle. First, a description of the adopted approach was presented. Next, the mathematical equations were developed to obtain the dynamic behaviour of the concerned system. The numerical computation was performed with MATLAB (matrix laboratory: a high performance language of technical computing) and validated by MBD (Multi-Body Dynamics) for Ansys, a professional multi-body dynamics simulation software powered by RecurDyn. Afterwards, the model was treated as an objective function included in genetic algorithm. The goal was to improve the ride quality and the road holding as well as the suspension workspace. The multi-objective optimisation aimed to reduce the Root-Mean-Square (RMS) of the seat’s vertical acceleration, the wheels load and the workspace modulus by varying the bodies’ masses, the spring-damper coefficients and the characteristics of the tires. Acceptable solutions were captured on the Pareto fronts, in contrast to the relatively considerable processing time involved in the use of a random road profile generated by the power spectral density (PSD). During the process, the compatibility and the efficiency of Jourdain’s equations were inspected.
Because of the importance of thermal residual stresses in composite materials, our study aims to compute them by the finite element method. Numerical analysis shows that these stresses need to be taken into account. The interface is affected by these stresses, particularly in the free edge. The discontinuity of the normal stresses along the interface and the shear value at the free edge influence the composite material behaviour during its use (e.g. the composite used as a patch for repairing a crack).
The finite element method is used to compute and analyze the residual stresses particularly near the fiber/epoxy interface, and these stresses need to be taken into account. An axisymmetric model has been used for stress computation and analysis, in this work two cases are considered by using an epoxy matrix with respectively glass and carbon fibers with a different volume fiber. Numerical calculation results show that the stresses are important. The interface is affected by thermal stresses particularly in the free edge. The normal and shear stresses values have an influence on the behaviour of the composite during service