In this investigation, three different explosive materials have been used to improve the properties of titanium grade 2: ammonal, emulsion explosives, and plastic-bonded explosives. In order to establish the influence of explosive hardening on the properties of the treated alloys, tests were conducted, including microhardness testing, microstructure analysis, and tensile and corrosion tests. It has been found that it is possible to achieve a 40% increase in tensile strength using a plastic explosive (PBX) as an explosive material. On the other hand, the impact of the shock wave slightly decreased the corrosion resistance of titanium grade 2. The change in corrosion rate is less than 0.1µm/year, which does not significantly affect the overall corrosion resistance of the material. The reduction in corrosion resistance is probably due to the surface geometry changes as a result of explosive treatment.

A high-nitrogen compound, 2,2′-azobis(1H-imidazole-4,5-dicarbonitrile) (TCAD), was synthesized from commercially available 2-amino-1H-imidazole-4,5-dicarbonitrile. It was characterized with infrared and nuclear magnetic resonance spectroscopy. Its structure was determined by single crystal X-ray diffraction. The crystal of TCAD tetrahydrate is monoclinic, with space group P2₁/c with crystal parameters of a = 10.2935(2) Å, b = 7.36760(10) Å, c = 20.1447(4) Å, V = 1500.27(5) ų, Z = 4, and F(000) = 688. Computational methods were used in order to fully optimize the molecular structure, calculate the electrostatic potential of an isolated molecule, and to compute thermodynamic parameters. TCAD has very high thermal stability with temperature of decomposition at 369 °C. Kinetics of thermal decomposition of this compound were studied and apparent energy of activation as well as the maximum safe temperature of technological process were determined.

Solid heterogeneous rocket propellants (SHRP) containing ammonium perchlorate (AP) emit a lot of hydrogen chloride (HCl) during combustion, which poses various environmental issues and makes the detection of the rockets easier. Part of the AP can be replaced by ammonium nitrate (V) (AN), which does not lead to the production of HCl. AN is a commonly used environmentally friendly oxidizer, but it is not usually applied in SHRP due to its disadvantages. One of these disadvantages is a phase transition near room temperature, which causes the density change of AN. Three types of phase stabilized ammonium nitrate (V) (PSAN) with inorganic potassium salts were obtained in order to shift this transition into higher temperatures (above the temperature range of the storage and the usage of SHRP). The SHRP with the PSAN were obtained, and the measurements of the heat of combustion, density, hardness, the sensitivity to mechanical stimuli and the thermomechanical properties were performed. The obtained propellants were characterized by similar operational parameters or were slightly lower than those without the PSAN. This means that AP can be partially replaced without significantly compromising the handling, safety or functionality of the propellants, while increasing the environmental performance of the solution.